Supco SLS180 Thermostat Automatic Reset Rollout Switch, 180 Degree F Cut Out Temperature, 140 Degree F Cut In Temperature, 45 Degree Angle 1/4" Terminal

Automatic Rollout 180F-140

With a temperature range of 180-140 degrees, this automatic reset rollout switch is ideal for applications that require a specific cut-in and cut-out temperature. The switch will operate normally as the temperature rises until it reaches 180 degrees, at which point it will automatically deactivate. However, if the temperature continues to rise (to a maximum of 194 degrees), the temperature reset button must be pressed to reset the switch and once again activate the equipment.

This unique automatic rollout switch combines the features of an ordinary manual thermostat with the convenience of automatic shutoff. The controller is wired into the appliance, and when food boils, or when you forget to turn off an oven, water heater, air conditioner, or other heat-producing appliance, the switch automatically pops out. It saves time, and helps prevent fires.

This is a SLS180 Thermostat Cut Out Switch. It is a 6 Terminals(6 Terminal) Switch. This switch has 120V Input and Output, 180 deg F Cut Out, 140 deg F Cut In.

The LogicBoard SLS180 Thermostat from Supco is designed to provide precise control for residential and commercial refrigeration and air conditioning systems. The volt free thermostat provides a wide range of settings, including a 45-degree hookup angle to accomodate equipment plumbing connections. The 90/180 degree temperature selector switch makes it easier than ever to select the right cold cut-in and hot cut-out temperature settings. The Rollout feature prevents damage that can occur from hookup pressure applied while mounting the thermostat.

This Automatic Reset Thermostat is designed for installation on outdoor gas grills and features easy-to-read temperature markings, an adjustable temperature range and a 45 degree angle 1/4" terminal block.

Perfect for installations in places like attics, basements or garages, the Supco SLS180 thermostat automatically resets itself 30 minutes after the area has reached its set temperature. This contactor is compatible with a variety of applications including oil, gas and electric furnaces, baseboard heaters, boilers and other heating applications. An on-board manual shutoff switch prevents overheating if temperatures rise beyond the 140F to 180F range.

Protect your refrigerator against over temperature by adding an SLS180 Thermostat to your compressor. This thermostat will reduce the risk of food safety issues, damage to property inside the unit, and reduce energy consumption by shutting off power if the temperature inside the refrigerator rises above 140 degrees F. This thermostat also features a 45 degree angle mounting bracket for easy and safe installation in your refrigerator's compressor compartment.