AMANA 167268 - Amana OEM Furnace Limit Switch
AUXILLIARY LIMIT CONTROL, DFAuxiliary Limit Control, DFAUXILIARY LIMIT CONTROLThis item is an auxiliary Limit Control which is used on the main limit for dual fuel furnaces. This product has been...
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New AccountGoodman limit switch | manual reset limit | yellow
The Goodman limit switch is a common replacement part for most Goodman or Amana furnaces. The Goodman manual reset limit switch turns off gas flow to the furnace if the blower fails to operate.
The Goodman limit switch is the replacement for various Goodman, Amana, Rochester and Aprill brand furnaces. This limit switch has a manual reset to turn off the furnace in case of error such as high temp or low temp.
This is a brand new limit switch that replaces the Goodman / Amana OEM part number, and it will fit on your existing furnace. It has several operating modes and options. This switch has manual reset with a red tab.
This Amana Furnace Limit Switch is designed and manufactured by Greenheck under license from Goodman Manufacturing Company. This switch is 100% compatible with Goodman OEM part number 128-2129, and is an exact replacement for the limit switch in the following Goodman model numbers: AMI CAT. NO. 162337; AMI CAT. NO. 162539; AMI CAT. NO. 162540; AMI 140679; AMI 140680; ARO 87242-0020, ARO 87243-0020
Replacing a faulty limit switch is the easiest way to repair your furnace and ensure that it keeps heating your house during the winter. This limit switch from Amana is designed specifically for use with Goodman furnaces, so it will fit perfectly and perform properly, ensuring maximum energy efficiency..
This is a limit switch. When turned on, it has a limit of 175F. It is for a Goodman furnace, and it will fit the following models: 38AQ9536-60, 38AQ9527-60, 38AQ9516-60. To adjust the temperature setting, please follow the steps below: You must remove or unplug the furnace to change any of the limits in this equipment. After wiring or changing your limit switch(es), it would be necessary to power cycle your unit by turning OFF then ON again on the furnace reset button which is located near the top right corner
This Limit Switch is used with electric heaters, heat pumps and air conditioners. This limit switch is for use with Amana Furnaces that use a mechanical reed switch as a limit switch.