Honeywell 12630 - 24V OR 120/240V FARM-STAT LINE VOLT SPDT 35-10

24V OR 120/240V FARM-STAT LINE VOLT

Honeywell Farm-Stat line voltage SPDT 35-10 plug in transformer/control. This 24V OR 120/240V Farm-Stat line voltage SPDT 35-10 plug in transformer/control is a self-contained unit that provides a control solution for motorized valve applications. It is designed for low power (up to 40 amps) and high power (up to 70 amps) applications with automatic or manual reset.

The Honeywell 12630 120/240V/35-10 VDC SPDT FARM-STAT LINE VOLTAGE CONTROLLER parts a DIN rail or can be installed in the front panel. The Controller is intended for use as a 2 - wire thermostatic controller in heating and cooling equipment. The same controller may be used with electric, warm air, and hydronic heating systems. It provides the following controls functions: instantaneous on, off, delay and modulating. The Controller provides changeover control between heat and cool modes when connected to appropriate reversing valves. For both 115 VAC & 208-

The FARM-STAT Line Voltage SPDT Time Clock (Model No. 12630) is designed for use as a time switch on a 120/240V electrical load. The unit can be connected to any 24V DC control device and used with a 120V/240V line source. This unit will not function on battery alone, nor can it maintain timing without AC power.

The FARM-STAT line voltage SPDT switch (12630) is a space saving, high-performance solid state device which is used for controlling the on/off operation of a single electric variable speed motor. The switch may also be used in applications such as dash panel and gate control, lamp control, etc. When used in a 120V application the maximum continuous current rating will be 14 amps. When used in a 240V application the maximum continuous current rating will be 17 amps. The 12630 is designed to control resistance heating loads such as baseboard heaters and space heaters with a maximum wattage of 48

The 12830 FARM-STAT line voltage SPDT switch has 15,000 VAC/VDC short circuit interrupting rating and a 35 amp continuous duty rating. This heavy duty switch is designed for rugged farm environment. The latching mechanism is rated to endure 100 operations per day for 20 years. The 12830 FARM-STAT line voltage SPDT switch is designed to be used in combination with any of the Honeywell programmable controllers; the 12240, 12400, 12600, 12660, 12850 and 12880 on/off programmable controllers. It may also be used with non-programmable

The FARM-STAT™ is easily installed in a breaker box, trips as low as 35mA. Connects directly to a 4 wire 120/240V 1P circuit or 24V 0.5P circuit with disconnect. One SPDT switch operation and one SPDT auto reset trip.

The Farm-Stat is a miniature SPDT relay that controls 120-370VAC circuits. It can be used with any of our current range of submersible float switches to make a variety of timed control circuits.