Honeywell 2901 , Inc. Remote Bulb Controller 0-100F Setpoint Range 3-10F Diff 20 ft Copper Bulb

TEMP CONTROL SPDT 0-100F 20' CAP.

TEMP CONTROLLER SPDT 0-100F 20' CAPACITOR

The DANFOSS 2901 Temp Control from Honeywell is an automatic temperature controller to be used with heat and/or cool control thermostats. It features a 0-100°F setpoint range, 3-10°F differential range, and comes with a 20' capillary tube complete.

This is a 3-wire, 120 VAC, HONEYWELL Temp Control Unit that operates a 3-wire 120 VOLT AC glass tube heating element up to 1000 Watts. The Setpoint range is 0 to 100 degrees Fahrenheit with a linear voltage output. It has a 20 foot capillary. It terminates with 120 Volt AC "plug in" wiring for easy installation. The thermostat can be installed in any enclosure provided that safe operating conditions can be maintained and there must be clear access to both the high and low limit controls."

Remote ON/Off bulb thermostat prevents bulbs from overheating. 0-100F setpoint range, 3-10F diff, control 4 20watt appliance lights from 10' away. SPDT relay can turn lights ON/OFF, as well as adjust temps. Copper wire.

Remote temperature control with 4-wire grounded connection. Features a solid state electronic proportional thermal controller that provides smooth, uniform heating with no sudden on/off transitions. The controller regulates the temperature of the controlled equipment by using output power and controls the rate of change of temperature in each cycle. The controller enables maintaining precise temperature control at a constant rate of change even when the demand varies. PROGRAMMABLE SETPOINT is 0-100°F (0-37°C). Active ON–OFF temperature cycling is provided up to 100F (37C), above which it is disabled. Constant ON may be provided for temperatures above

This is a Temp control unit that works with any type of heat source, including Incandescent or Quartz Halogen. It can be used as a thermostat to control your Incandescent or Quartz Halogen lamp or it can be used as an on off switch to control your lamp. The temp probe will reach zero on the scale and then it will start ramping up in temperature approximately 2 degrees per minute.

Honeywell's Temp Control System is standard equipment on hundreds of thousands of new homes. These units enable the homeowner to control both the heating and air conditioning equipment from one convenient location. The unit includes a lighted, five-position digital controller, mounted to a standard electrical box.