T775B2032 HONEYWELL CONTROLLER W/2TEMP INPUTS & 2 SPDT RELAYS
The Honeywell T775B2032 Controller has 2 temperature sensor inputs and 2 relay output. It is Permanently set up for 2 SPST Relays, but can be modified to have 1 SPDT Relay or 1 DPST relay if desired by the end user, instead of the 2 SPST relays. This controller can monitor a wide variety of sensors including resistance, PT100/Pt1100, thermocouples and thermistors and it can be used in heating, cooling
The Honeywell T775B2032 Electronic Controller is a multi-purpose controller designed specifically for sprinkler and irrigation control. This controller offers 2 terminal blocks to operate up to 2 valves, relays or solenoids and a maximum 1A @125V relay output. It has 4 channels and 1 sensor input terminal block that accepts 0 - 10V, 4-20mA or 0-5V.
The T775B2032 is a 2-Input, 2-Output digital controller with a floating output. This 4-wire temperature controller features R/S wire capability for ease in wiring and configuration flexibility. The input terminals provide differential switching to allow detection of either process or equipment ambient conditions. All Honeywell Process Controllers are factory preconfigured and calibrated for common applications, but may be configured using the programmable features of the PC board. The Controller features two SPDT relays, a
This is an original Honeywell MN71414B3000 remote temperature controller with 2 sensor inputs and 2 SPDT-relay outputs. This remote temperature controller has a working range of 0° to 400°F, with a typical accuracy of ±1°F, and can handle heat up to 30 Amps.
This controller is a direct replacement for Honeywell Zone valves and thermostats or other brand Zone Valve controllers. It has two (2) temperature inputs for regulating two different wireless valves or elements with a Nema 4X enclosure. $42.00 Quantity :
The Honeywell 2942 is an electronic 2-wire remote controller with 1 SPDT relay output and 2 sensor inputs. The controller has a front panel and a terminal strip to accept cables from sensors, switches, or other devices. The terminal strip is designed for use with 18 AWG solid wire.
Remote Controller with Three (3) SPDT Relays and One (1) External Sensor Input, One (1) External Sensor Output, and Two (2) Internal Temperature Sensors.