S.S. RUB RAIL 1/2IN X 12FT HB
S.S. RUB RAIL 1/2IN X 12FT HB
S.S. RUB RAIL 1/2IN X 12FT HB MADE IN USA - APPLICATION: TO BE INSTALLED ON MANUALLY HANDLED S.S. TRUCKS ONLY
The TACO® Metals 236-S114500P12 S.S. Rub Rail with End Caps is ideal for boats up to 20', this marine grade stainless steel rub rail has a 1/2" diameter by a 12' length and has an HB finish.
The S.S. Rub Rail is constructed of 1/2" X 12' long x 1/8" thick solid stainless steel strip with corners welded. It is used on the bottom of flat or round kayaks to prevent rubbing on a boat rack or car top carrier. In addition, it adds strengthening to round kayak models with a lack of a bottom center ridge.
This is a Stainless Steel 1/2in x 12ft. Hand Bending Rails
These fully welded 304 stainless steel rub rails will not rust, corrode or pit and are guaranteed for 25 years of exterior use. They fasten to the side decks with stainless steel screws which can be removed without being damaged. This product comes in an easy to cut 12 foot length. If it is necessary to cut the rail, serrated sections are provided on the side of each rail for a clean professional job. Please allow 4-6 weeks for delivery direct from the manufacturer.
Built to last, these heavy duty grade stainless steel tube rails are perfect for many applications. The 12 foot long TACO Rail is an Easter egger used to create a railing for a stairway or deck. Great for the boat, RV or if you just want a little more protection on your boat rails. The tube rail is 1/2 inch diameter and is sold in 10 foot increments.