HONEYWELL TB6980B100 TB6980B100 24V NON-PROGRAMMABL FLOATING CONTRO

24V NON-PROGRAMMABL FLOATING CONTRO

HONEYWELL TB6980B100 TB6980B100 24V NON-PROGRAMMABL FLOATING CONTRO

The 24V Non-Programmable Floating Control Thermostat is used to control a forced air heating or cooling system. The Tb6980B100 is used to control the fan circuit and the blower motor in a three-way system. The 75F is a delay 24v non-programmable network floating control thermostat used as an anti-short cycle timer in combination with our non-programmable motors and booster coils. The anti-short cycle timer will eliminate short cycling to avoid unnecessary and wasteful energy usage from your home heating and cooling system.

The TB-6980B is a non-programmable, fixed timer with 24-Volt bimetallic contacts. The TB-6980B has a time delay (Tmax) of approximately 4 minutes and the weld power supply. .The TB-6980B contacts can be programmed for surge suppression by using the intermittent mode of the switch during normal operation of the contactor.

Simply turn on the switch, and the 24 VDC, 10 amp float supply will provide 24 VDC to the electrical system when voltage drops below a specified level. The TB6980B100 features an Overvoltage Trip Set to 18.5V, a Short Circuit Trip Set to 16V and a Reverse Polarity/Overcurrent Trip Set to 20A.

The Honeywell TB6980B100 offers optimal control for all types of incandescent, sign and fluorescent ballasts. This compact unit features a 1- to 10-second delay, manual reset and overload protection. Its floating contacts eliminate the need for switch wiring which can cause arcing. A wire bridge jumper is included at no extra charge. This float is low profile, and designed for mounting directly to the box terminal strip up to 1? in width.

This portable thermostat has a 24-VAC output and is designed for electric heaters, baseboard heaters, gas fireplaces, and central forced air systems. The device can be used in place of a standard wall mounted thermostat

HONEYWELL TB6980B100