HONEYWELL TB7980A100 TB7980A100 24V NON-PROGRAMMABLE MODULATING DIG

24V NON-PROGRAMMABLE MODULATING DIG

The Honeywell TB7980A100 TB7980A100 24V Non-Programmable Modulating DIG is a 24 volt,Non-Programmable,Modulating DIG. This unit is not programmable and will operate only on a digital remote temperature control. The Honeywell TB7980A100 TB7980A100 24V Non-Programmable Modulating DIG is designed to maintain the air at a set temperature controlled by the thermostat, either increasing or decreasing fan speed to provide the correct room air temperature.

The TB7980A100 is a 24 V non-programmable modulating dig transmitter that incorporates a built-in temperature sensor and gives you a reliable remote sensor measurement. With an accuracy of ±2° F (1° C), this unit is perfect for industrial, agricultural, fire protection, and HVAC applications. This remote modulating sensor works with the CT wireless transmitter to provide accurate measurement of temperature in remote spaces such as tanks, storage areas, warehouses, food processing facilities, or any other area where you need floor-to-ceiling temperature measurement. You will notice improved response time in these remote sensors

The Honeywell TB7980A100 24V Non-Programmable Modulating Digital Inverter Heating System is for commercial applications. The heater is designed to accommodate large oversized duct systems. It features a stainless steel baffle, a scroll-type blower, and an aluminum fin coil with a non-programmable modulating controller. A self-diagnostic feature provides added safety and longer life. This heating system comes with a 5 year limited warranty from Honeywell against defects in material or workmanship.

The Honeywell TB7980A100 24V Non-Programmable Modulating Vacuum has a low noise level and a long life. It is ideal for dry pick up applications such as hardwood floors, carpets, tile, upholstery and more. It also comes with safety features including: low emissions with small filters, lightweight design and a built-in handle. Optional accessories are also available.

The HONEYWELL TB7980A100 TB7980A100 24V Non-Programmable Modulating Infrared Heater is a non-programmable heater. It is a multi-stage Infrared Heater that provides up to two zones of heating depending on application and temperature needs.

The TB7980A100 is a non-programmable modulating 24Vdc, 200A transformer with secondary ammeter and galvanic isolation. The TB7980A100 provides electrical isolation between primary and secondary windings while maintaining small size and low cost. It does not have built-in wiring to connect directly to an operator interface. It requires an external relay or control circuit to turn it on and off. In case of short circuit, the TB7980A100 has a resettable fuse without interrupting the supply.

The TB7980A100 and TB7980A102 are non-programmable, modulating switches installed primarily for control of motors, pumps, valves, variable frequency drives, etc. They have two manual handles which enable the operator to manually energize a circuit or de-energize the contactor when a machine running on start/stop control is operating at normal speed and needs to be stopped without stopping the entire system.