Johnson Controls 9292 Room temp sensing element (1000 ohms 1%) with setpoint (55-85°F)

ROOM TEMP SENSING ELEMENT; 1000 OHM; NICKEL;

Johnson Controls 9292 Room temp sensing element (1000 ohms 1%) with setpoint (55-85°F) is not being produced anymore.

Johnson Controls 9292 Room temp sensing element (1000 ohms 1%) with setpoint (55-85°F) - Element, R-, DO NOT REMOVE AEROSOL CONTAINER FROM THIS PACKAGE UNTIL READY TO USE.

Johnson Controls 9292 Room temp sensing element (1000 ohms 1%) with setpoint (55-85°F)

Our Johnson Controls 9292 Room Temp Sensing Element is 1000 ohm at 1%. It has set point of 55-85°F. Johnson Controls room-temperature sensing elements are used as a power-switching device in heating and cooling systems to regulate system output based on preset temperature requirements.

Johnson Controls 9292 Room temp sensing element (1000 ohms 1%) with setpoint (55-85°F) is a room temperature sensor designed for use in HVAC systems. It is used to sense the temperature of the outside air and produce an output signal corresponding to this temperature. This output signal can then be used to control thermostats, actuators or other building equipment.

Johnson Controls 9292 Room temp sensing element (1000 ohms 1%) with setpoint (55-85°F) is a single element assembly that replaces the conventional RTD and thermistor. The 9292 sensor is designed for use in heating, ventilating and air conditioning (HVAC) systems to sense space temperature.

This is a room temperature sensing element that has a 1000 ohm nominal resistance with a self-regulating set point of 55-85°. The probe is made from Nickel.

Johnson Controls 9292 Room temp sensing element (1000 ohms 1%) with setpoint (55-85°F) - AC ceramic elements are designed for use in residential and light commercial heating, ventilating and air conditioning applications. They are commonly used for regulating the output of heaters, fans and pumps.

Johnson Controls Room Temperature Sensing Element 9292 (1000 Ohms 1%). If you need a Johnson Controls product, you’ve come to the right place.

Johnson Controls Temperature Sensing Elements are used to convert an existing HVAC control signal into a temperature sensing signal. They can be used as room-temperature detectors and/or set points in heating and cooling, humidifying and dehumidifying applications.