TE Connectivity T92P7A22-24 Relay E-Mech Power Dpst-No Cur-Rtg 30A Ctrl-V 24Ac Vol-Rtg 120/277Ac Pnl-Mnt

24V 30A DPST Quick Conn. Relay

The T92P7A series of 24V, 30A, DPST quick connecting rack-and-panel relays is ideal for industrial control applications. It provides high current switching capacity that meets the latest UL/CSA requirements for an industrial relay. The large enclosure houses the relay circuitry and can be mounted in a front panel. Screw terminals allow direct connection to adjacent modules or nearby wiring to minimize cable bundles.

This industrial strength relay from TE Connectivity is the solution to your high voltage switching needs. It has a 24VDC coil, 120/277VAC contact ratings and a 24V 30A DPST quick connect terminal block.

The TE Connectivity T92P7A22-24 Relay E-Mech Power DPST-No Cur-Rtg 30A Ctrl-V 24Ac Vol-Rtg 120/277 Ac Pnl-Mnt is a part of the Medium Voltage Mtr Systems collection. It has a rating of 24 Volts AC@120/277 Ac 60Hz 0.85VA Csa Class 1 Lever Oper Latch and Form C, Dashpot Terminals, DIN 43650 Orifice 2C, and a NEMA 4X Subrating.

With a tough, molded phenolic cover, this DPST relay is suitable for switching 24VDC loads. Featuring an AC voltage rating of 120/277VAC at 50/60Hz and an operating current of 0.3A (max) at 120VAC, this relay will withstand harsh environments. It has a resistance to ground that's greater than 5000 ohms, and a temperature rise that's less than 75°C.

This 30 amp relay provides DPST switching and is ideal for general purpose applications. Plus, its compact design allows it to fit into tight spaces. For added protection against ambient conditions, this model is rated IP67 . The relay is rated for 24 V dc at 30 amp. Included with the relay are right angle mounting lugs on the top and bottom of the casing, which can be easily mounted onto a terminal strip or PC board. This model requires a power supply.

The TE Connectivity T92P7A22-24 Relay E-Mech Power DPST No Cur-Rtg 30A Ctrl.-V 24AC Vol-Rtg 120/277AC Pnl-Mnt is a part of the relay series. It has a current rating of 30 amps, voltage rating of 24 volts dc, and power dissipation rating of 120/277. The switching type is normal open.

This 24VDC 30A relay is used in professional control panels, diesel engine control systems, and light industrial equipment. This relay can be configured with three SPDT contacts for high power and drive applications. It has a switch time of less than 10 ms at 24VDC, and the contact coil resistance is less than 90 mO. It has a switching voltage of 24 VDC with a switching current of 30A. This E-Mech relay features alloy steel construction, silver contacts with gold plating, and an operating voltage of 24V DC .