DELFIELD F10329 RELAY, TIMER, 120V, 1HP, ()

Timer Relay, 120V, 1HP

The Delfield F10329 relay, timer, 120V, 1HP operates through a 120V circuit that can control a 120V electrical load up to 1 horsepower. It uses direct current (DC) and has a capacity of 30A. This product comes with a limited one year manufacturer warranty that protects against defects in material or workmanship.

This timer relay for motors is capable of replacing motor timers to operate the equipment lastingly. It keeps your indoor or outdoor air blowers working all day long. The 120V timer relay is easy to install and has features like solid-state on/off control, resistance temperature detector with 0-65C adjustable range, thermal overload switch with integrated push-button reset, 2 HP contactor with a 15A rating.

The FQR-1, 3-Wire plug-in timer is a 120V, 1HP, single pole relay with a SINGLE set of contacts. Once the unit has been mounted to the wall or cabinet with four screws, you simply plug your device into the timer and by dialing in a time (1 to 24 hours), you can control when your device turns on and off. The timer mounts easily to the wall or cabinet with 4 screws, and has a "clear window" to make it easy to set for precise output times.

The F10329 Relay Timer is used with the H5000 Series refrigerators. It is 120V and has a 1HP maximum load. It has a model number of 106-7715-20, and the application number is .047.-3.

Offers smooth power distribution to a 120V single phase electrical motor, controlling and shutting off your air conditioning unit without the use of a SOLAR TRIP or HUMIDISTAT. Timer Relay offers smooth, timed switching to preserve compressor motor life and eliminate unnecessary wear and tear.

The 1 HP Relay Timer comes with an easy to set ON/OFF switch. This model is designed to replace a mechanical timer on certain models of indirect water heaters that have a two-part power shunt system. The relay's contacts can handle up to 5 amps at 250 volts.

The Relay Timer allows precise, user-selectable control for a wide variety of electronic devices through an industrial relay output. The device is ready to use, by simply plugging it into any 120V outlet and connecting your load device. Control up to 1000 watts continuously or 2000 watts for 1 minute. Relay contact is rated 10 Amps, 125 VAC, 15A @ 250VAC, 10A @ 120VDC.