TOTO® THU395 G500 MOUNTING BLOCK HARDWARE

TOTO® THU395 G500 MOUNTING BLOCK HARDWAREG500 MOUNTING BLOCK HARDWARE

TOTO® THU395 G500 MOUNTING BLOCK HARDWAG500 MOUNTING BLOCK HARDWARE

TOTO® THU395 G500 MOUNTING BLOCK HARDWARE

TOTO® THU395G500 MOUNTING BLOCK HARDWARE  For the toilet to get in line with the height of the sink  TOTO® mounting component TOTO® G500 * Mounting block hardness not lower than 120 kgf / cm2 ( 16 kgf / mm) * Length: 590 mm 495 mm Y-12mm parts * Length: 600 mm 497 mm Y-14mm parts * Length: 610 mm 500 mm Y-16mm parts

The G500 Mounting Block Hardwares delivers exemplary performance for one of the most advanced, powerful and cost-effective toilets for residential applications on the market. This product has been very well received. IT is used with TOTO®'s new toilet designs that can be mounted onto any surface using the mounting hardware kit. G5_00 Mounting Block Hardware kit meets and exceeds ASME/ANSI A112.19.8 Performance specifications, including water supply pressure, tank weight, flush volume and

The TOTO® G500 mounting block is used whe *** To ensure that you are buying the correct mounting block, please look for the serial number range (S/N) stamped or inscribed on the side of the mounting block. If there is no such mention it could either mean the mounting block was not included with your toilet, or was installed and removed by someone else. From our site: The G-Max Flush Valve System is a push-button piston flush valve system that delivers a powerful and

These wall mounting brackets are designed specifically for the G500 toilet. Each mounting block features a snap-button mechanism to ensure that it fits securely into the base of your G500 toilet. Also included with each package of mounting blocks is hardware, including six zinc bolts, six lock washers, six zinc screws, and four nylon spacers, as well as screws and anchors that allow you to install the mounting block on a plywood subfloor.

Mounting parts for the G500 lavatory system include brackets, covers and caps Narrow, space-saving fascia profile must be cut to fit! Versatile mounting kits provides flexibility of installation in both offset and inline applications Can be cut to length with a hacksaw. Available in bulk pack of 20``
Any copying, downloading, modification or retransmission of this material is strictly prohibited and punishable under federal law.