Trane BLW0343 Blower Assembly

Blower Assembly

The limit switch comes with a variety of mounting and connecting options

A limit switch is used to detect an object near the end of travel and stop it from reaching the end of its range

It's got important information that can help you effectively operate and maintain your appliance

When they are moved farther apart, they separate, opening both circuits

This switch is used for a furnace and air conditioner to turn on and off

The Trane Limit Switch Manual 25 is a general purpose, normally closed, single pole switch in NEMA 4X enclosure

The circuit is connected to the fan/auxiliary contact of a thermostat group

The SWT3088 Limit Switch is designed for use on the Trane XE40, XR40, and XR50 air handlers

It is important to have the right switch when installing a unit in order for it to work correctly and safely

It can be used for connecting the air conditioner or furnace to a humidifier

The LIMIT SWITCH MANUAL 25 Limit Switch is used for enabling and disabling of ventilation and thermostat groups

Use of any other part may create a hazard or cause product damage

A limit switch has two circuits, one on each side of the switch, which are normally not connected together and are separated by the two springs inside the limit switch

It is used to limit the operation of an actuator, and may be wired with a normally open or closed circuit

For help setting up or operating your appliance, look no further than this troubleshooting guide

25 LIMIT SWITCH MANUAL 25

When the contacts are moved closer together, they cross each other between the springs, closing one circuit while opening the other

A Limit Switch is a use to control the range of motion for a motor or other machines

This limit switch assembly is used to sense that a blower door is open or closed

This manual contains instructions for installation and wiring for the Limit Switches

Limit switches should be replaced only with the identical replacement part

Free Shipping on orders of $500 or more