Trane SEN1449 10K Wired Zone Sensor W/Dial

10K Wired Zone Sensor W/Dial

This zone sensor has a single dial interface to control it from your wired controller

The Trane Sen 1449 Wired Zone Sensor is a part of the Trane Comfort Series I HVAC System

This model is certainly all that and will be a perfect buy for your home improvement needs

Adjusting the sensor's mounting height can help ensure the sensor will reach and activate at the desired temperature level

The sensor sends signals to the controller, which then controls the zone valve based on the system’s setpoint temperature

It is used on zoning applications and will allow the furnace to run only if a call for heat is detected in that area

The Trane Zone Sensor is a temperature-sensing device that can be used for thermostat control in heating and cooling systems

Measures temperature in heated rooms and sends a signal to the thermostat when the temperature drops below your desired setting

Neuco Inc is proud to present the Trane SEN1449 10K Wired Zone Sensor W/Dial

The Trane Wired Zone Sensor for 10K series provides audible, visual and door switch notification when the system is in heat or cool mode

NPT zone valve and a temperature-sensing probe into one unit

It can be mounted to a wall, ceiling or ledge via screws or double-sided tape

Made of durable materials, this wired zone sensor is built to last

It has a 10k resistance and comes with the wiring necessary to install it

The SEN1449 Wired Zone Sensor with dial allows you to set temperature in each room

Just program the wired zone sensor with a compatible indoor and outdoor temperature instead of using a standard programmable thermostat, and the sensor will activate or deactivate the outdoor unit based on your pre-programmed settings

This zone sensor comes with a dial that indicates humidity levels and is recommended for residential applications

The Trane 10K Wired Zone Sensor with Dial is compatible with all Trane condensing units manufactured from 2002 and later

It will work with any of the following wired zone controller types: UPB, X10, Insteon, X-10 Pro 900 MHz, and Radio RA2 (RF)

The Trane 10,000 BTU Wired Zone Sensor with Dial allows you to control your air conditioner or heat pump even when you're not home

This Trane zone sensor is easy to install and will fit in a single gang box

This zone sensor comes with a handheld dial to adjust the temperature range at which it will activate and deactivate

This zone sensor is a replacement for your existing wired zone sensor

The dial operates like a light dimmer so you can fine tune your system to get the desired comfort level in each room

Most sensors only offer manual on/off settings, so this feature is especially useful during extreme weather conditions

The SEN1449 Wired Zone Sensor with Dial combines a standard 1-in

Choose a high heat for large rooms and a lower temp for smaller rooms, like the bedroom or kitchen

With so many buying choices available recently, it is great to have a brand you can trust