Peco Controls SP155-017 10K Ohm Wired Zone Sensor 10K Ohm Wired Zone Sensor

10K Ohm Wired Zone Sensor

When you need an economical, energy-saving zone control for the heart of your irrigation system, Peco's SP155-017 10K Ohm Wired Zone Sensor is a smart choice.

The PIT-LOC® SP155-017 Wired zone sensor is designed for use with the Peco Controls Electronic Keypad systems. The 10K Ohm zone sensor regulates the relay and can be used as a double key switch in residential and commercial applications.

This Red/Green wired 10K Ohm zone sensor is designed for use with Peco Controls' Honeywell Digital Thermostat product line. The 3-wire terminal zone sensor is constructed of UV stabilized ABS plastic and steel. The large indicator light is rated at up to 500mA and is easily replaced without removing the wiring harness from existing wires.

The SP155-017 Wired Zone Sensor, featuring a 10 K ohm resistor and BNC connectors, is exclusively designed for tamper applications by Peco. The zone sensor can be used with any of Peco's zone controllers to help maintain the privacy of sensitive areas in high traffic areas.

A replacement or spare zone sensor for your Peco Controls 100 Series outdoor module. It can also be used on Polar Bear Wireless Outdoor Controllers. The 10K ohm zone sensor senses temperature in outdoor environments and sends a reduced value signal bypassing the heat function on your thermostat. It offers three-stage, infinite heat settings that adjust with the ambient room temperature.

Zone sensors send Peco Controls' Sensi® control systems detailed information about the area they are protecting. The 10K Ohm resistive loop zone sensor detects changes in the magnetic field around a protected area, such as an open door or a break-in attempt. The sensor is designed to activate the alarm within milliseconds when it senses a magnetic field change.

The Zone sensor is a single-wire range to transmit alarm status information to the control panel.