Honeywell AT20A1123 120V-24V 20VA PANEL MOUNT TRAN

TRANSFMR 20VA 120V-24V SEC

Honeywell AT20A1123 120V-24V 20VA Panel Mount Transformer 120V-24V 0.1 VA panel mount transformer. Factory original product.

The Honeywell AT20A1123 is a 120V-24V Transformer with 20VA. This transformer is used for 120/208/240 Vac to 120VAC 20VA Panel mount transformers.

Stay prepared and safe with a Honeywell 20VA Panel Mount Transfer Switch. This transfer switch is 40% smaller than the standard T3 model and designed to be mounted on a wall. This External Transfer Switch provides 120V to 24V power to an emergency generator at campsites or home backup systems. It works with generators up to 7500W, and features 12/24V for 120V split phase systems, a low battery alarm that alerts when there is only 3 hours left of generator time remaining, and reverse polarity protection.

The Honeywell Transfomer with Selectable Output, Indoor Panels AT20A1123 converts utility power to 120/240 volt AC electrical power, operating 24/7 to support critical loads. The unit is designed to be used as a stand alone unit or in conjunction with an emergency generator. It has an automatic electrically-operated output voltage selector switch which allows the user to select 120 or 240 volt output based on input voltage.

Featuring an Intel AT20A1123 20V AF power module, the Honeywell LV-LPAT20AF120-24 120/240V 1-Phase to 24VDC Self-Contained Low-Power Industrial Automation Transformer provides best in class performance and reliability for applications such as factory automation or monitoring and control. The Honeywell LV-LPAT20AF120-24 120/240V 1-Phase to 24VDC Self-Contained Low-Power Industrial Automation Transformer has dimensions of 3.3"H x 9.7"W x 2.4"L and weighs

The Honeywell AT-20A1123 is an all-in-one, panel mount, 20VA zero-U, 120/240V transformer for use with any 20VA AT Series control. The AT-20A1123 replaces the standard power cord provided with the device and offers higher efficiency, safety from over power conditions and surge protection. The AT-20A1123 connects to the previously installed line cord that came with the original device.

The AT series has been the panel mount workhorse of the industry for over 40 years. The AT20A1123 requires no battery, and is true "plug and play" unit that can be connected to a 120V or 24V load center and operated by a standard wall switch. These units typically control fans, motors, humidifiers, heating systems, etc.