United Electric H100-703 Co. H100703 9/300# 1/4"NPT NEMA4 Diff#Swt

"9/300# 1/4""NPT NEMA4 Diff#Swt"

The H100-703 Co. H100703 9/300# 1/4"NPT NEMA4 Diff#Swt is a good quality product and is reasonably priced.

Choose the H100-703 Co. H100703 9/300# 1/4"NPT NEMA4 Diff#Swt to open your door to the world of air compressors now.

The United Electric H100-703 Co. H100703 9/300# 1/4"NPT NEMA4 Diff#Swt is solid and easy to use. Its compact design is intended to fit in small spaces. With its retractable cord, this corded electric foot switch is very convenient.

H100-703, Cooper H100703, 9/300# 1/4"NPT NEMA4 Diff#Swt

The United Electric H100 series mini magnet switchers are an ideal solution for a wide variety of industrial applications requiring small footprint, highly efficient, full power switching. These cast aluminum contactors feature twin coils with T4–T8/T6 contacts and one or two clearly marked bronze colors to indicate operation. They are available in pole-changing or induction-type models and are housed in a NEMA 4X enclosure with front-access terminal box for easy wiring.

The H100 Series pneumatic angle head is the standard for offshore drilling applications where ease of operation and extreme reliability are required. The main housing has a sturdy aluminum C-frame construction. The head can be rotated 90" from zero to fifty degrees with a single lever movement. A special locking device in the clutch of the head prevents accidental movement in the event of a sudden shock or jarring motion. This feature was designed specifically for rig floor service personnel who must work atop near-vertical wells.

Our patented technology allows us to offer the lowest cost, highest power density Electric-AC drive on the market today. The control/drive has a built in cascade capacitor for use with inductive loads such as motors, fans, pumps, and more. The drive features variable frequency (0-200) VAC output @ 460VDC; solid state controls; external analog programmable RS485 port; and a built-in Heat Detector failure alarm relay with hot stall motor shutdown.