Honeywell 3143 - Motorized Zone Valve, 120V 3/4" Sweat Connection Line Voltage 7 Cv capacity.

V4044A-1191 3 WAY VALVE 120 VOLT NORMALLY CLOSED HONEYWELL 3/4 COP.

The Honeywell V4044A-1191 uses unique design to permit individual zone control for a bathor shower. The valve operates on 120 Volt and standard 3/4 compression connection (sweat). This WC3 model has a Copeland 3/2 rocker switch with linear actuator. The process connection size is 3/4 inches, and the line voltage is 120 volts.

The V4044A-1191 3 way valve can replace Zone Valve 3143 and is normally closed. It has a P.T.O. (Primer Technology Oil) type cartridge, and was designed for use with liquid line heaters. The installer must make sure the selection of the end items will assure proper Q control of the system. The spring loaded design allows for easy replacement by eliminating the use of wrenches or special shut off tools that may be damaged if used improperly. The

The Honeywell V4044A is a 3 Way Valve that is used to limit the volume of water that can flow through the valve. This Honeywell Valve has a Sweat Connection Line Voltage and has 720 Psi capability - 7 Cv capacity. The Motorized Zone Valve includes poppet-type, normally-closed valves designed to limit water flow within a commercial heating and cooling system.

The Honeywell V4044A zoning valve is a Normally Closed two pole seven changeover valve designed to limit heating and cooling flow to specific areas of a system. The V4044A Zoning Valve allows for the selection of seven different temperatures to be permitted in each of the three heat/cool areas being regulated by the zone system. Recharge kits are available for this device. Please see listing below for details.

The 3 Series Zone Valve offers greater control over zone heating than any other system. The valve is designed for use in combination with a Carrier ® or Trane ® V4044A-1191 Expansion Valve and Carrier ® or Trane ® F486T-1191 Filter Drier. The standard 7 Coil × 120V operation allows seamless integration with existing design, eliminating the need for additional electrical panel capacity.

The V4044A Series zone valve with voltage compensation is designed to provide [degree] of heating and/or cooling to a single zone. The valves provide precise temperature control via a unique and versatile energy conservation feature. Two normally closed pilot actuated solenoid valves are positioned accordingly to allow the passage of hot or cold water depending on the pilot signal. A unique spring loaded actuator enables the user to significantly reduce flow rates for improved energy efficiency compared to the traditional water circulating pump system. #

The Honeywell 3143 3-Way Valve is a replacement part whose purpose is to control water flow in your home. This valve contains two inlets and one outlet that can be switched anywhere along the main line, giving you flexibility during installations.