HONEYWELL V4295S1021 V4295S1021 120V 1-1/4" NPT N.O. SOLENOID GAS V

120V 1-1/4" NPT N.O. SOLENOID GAS V

The Honeywell 120V 1-1/4" NPT N.O. SOLENOID GAS V VALVE is a manually operated, normally closed valve with outlet side connections. It also requires the use of a double lever operator or manual control valve.

HONEYWELL V4295S1021 V4295S1021 120V 1-1/4" NPT N.O. SOLENOID GAS V

The Honeywell V4295S1021, 120V 1-1/4" NPT N.O. SOLENOID GAS VALVE, 2 position normally open non-electric, screw in valve with integral pilot and 5/8" female pipe thread, bronze body and brass bonnet. Gas valve is ideal for use with propane gas to direct gas supply to home appliances such as gas grills.

This Honeywell V4295s1021 120v 1-1/4" NPT no solenoid gas valve is used to turn off natural and LP gas valve. The direct electronically commutated electromagnetic control produces a mechanical force without generating any heat. The valve will turn off of gas when its wiring is cut or broken. The Honeywell V4295S1021 120v 1-1/4" NPT no solenoid gas valve works with LP gas, but not for use with natural gas.

The Honeywell V4295S1021 gas valve solenoid is designed for use with natural gas and propane in residential and commercial applications where low operating voltage is required. The compact, NEMA 4X rated, electro-mechanical 120V solenoid with gas position indicator switch comes equipped with a 1-1/4" NPT inlet and outlet ports, one hardwire terminal, 12 potential sizes ranging from 1/8" to 2", and can be field trip positioned inside the valve body without disassembly.

Honeywell's V4295S1021 120V 1-1/4" NPT gas detector with fixed flame photocell is a self-contained, sealed-beam detector designed for use in natural gas or propane systems. This photocell will trip on rising flames from the pilot of an open burner or positive line to indicate a flame failure condition in the gas piping, and provide temperature shutdown protection as well. Its sealed construction provides totally enclosed detection of flammable gases and vapors.

This single phase solenoid valve can be used up to a maximum of 100 psi and 100% of rated air. The Solenoid has a stainless steel diaphragm and normally open pilot operation. It is designed to release during a power interruption or cyclic load changes and works with gas or air systems. This Honeywell 1 hour 120 VAC N.O. Valve allows solenoid operation to be easily turned off and on, allowing for precise control over the air flow in your system. This helps prevent gas leaks, saves energy, and protects equipment from being damaged by excess airflow.