STEAM/H2O VALVE 1-1/2",29 CV,SCREWE
This valve has one steam port and one water port. The steam port is 1-1/2" NPT and it has a 29-Cv stem down to close against a pressure of 100 mopd (max allowable pressure for one of these valves). Steam is left inlet and water is right inlet. It is used to close against 100 mopd pressure and above. This valve comes with a metal shoe, but does not have an actuator or handle on it.
The Honeywell 3197 A100A101 1-1/2" 2Cv Valve Body 29.3CV fits SteamApplications,20 and 440Cv. The BODY is straight from the box as it's shipped to the field, without end seals or O-Rings. This valve body is available in several configurations with ball or needle valves.
This 2-way steam / water valve has a 1.5" inlet with stem down to close. It is for use with steam or hot water.
This valve works correctly on all 2 way steam/water heaters. It has male stems on both ends and is the most popular and versatile 2-way valve made.
The 3197-00 is a two-way, diaphragm type steam/hot water valve used for on/off control of steam, hot air, or water. The heavy-duty metal construction provides strength and reliability. This valve has an inlet port with a 1?? female pipe threaded connection and an outlet port with a 1?? female pipe threaded connection.
The Honeywell 3197 Series is a 2-way, 1-1/2" (40 mm), normally closed valve suitable for steam or hot or cold water service. The 3197 Series valve is designed and constructed to the highest standards for safety, durability and long life. It features an internal manual lever that must be moved to the open position in order to close the valve.
The Three Position Pneumatic Steam Inlet Assembly is designed to deliver steam and air at the same time for increased throughput. This pneumatic control valve features a two-way steam port which provides four positions of the valve to meet a variety of steam control requirements.