Honeywell 67146 PIPE SIZE: 1 1/4 INCH, CV: 18.7. 3000 SERIES: REVE

PIPE SIZE: 1 1/4 INCH, CV: 18.7. 3000 SERIES: REVE

Honeywell's Specs: Name: Clear View Maximum Security line pipe Size: 1 1/4 in. Torque: 140 ft/pounds. Durometer Hardness: D166. Load Value: 300 lbs. GPM: 18.7 at 175 psi System Operating Pressure Range: 65 - 175 psi

This Piranha Pump 67146 1.25 Inch Flange with 1.25 inch Female Flare x 060" S3600 2.75 Motor is made of aluminum alloy for lighter weight and increased corrosion resistance.

Honeywell's XR-3000 True Blue Series Pneumatic Actuators have many advantages over standard Reduced Pressure Zone Assemblies (RPZAs) including faster response time and smaller valve sizes. XR-3000 actuators are suitable for use in nonhazardous applications with noncorrosive gases and vapors. Features and Benefits include: 1/4 – 2-Inch (DN 6 – 50 mm) valve sizes, 2 x the burst capacity of standard RPZAs, Polypropylene body, PTFE and aluminum piston, Double acting for use with either air or vacuum, Lightweight

Honeywell 67146 1/2 inch polyethylene pipe, approved for gas and water use, has a Min. Bend Radius of 4 Inch to regulate flow and maintain consistency in pressure as the system reaches breaks and can be joined with glue or solvent.

The high efficiency, quiet running F1000-30 115V circulator pump is suitable for circulating fluids in low viscosity and temperature non-corrosive systems. The pump is designed for use in cooling systems, heating systems, nuclear applications, and process systems. The combination of a shear mounted shaft seal, embedded shaft seal and magnetic drive cap produces virtually zero fluid leak sites. Additionally, the pump features a positive displacement diaphragm that provides backpressure capability and allows for installation using either gravity or suction lifts.

The Honeywell 67146 is a white closed-cell pipe insulation that protects pipes and helps save energy. It is an eco-friendly choice thanks to its closed-cell polyurethane design that offers thermal resistance, flame retardant qualities and can withstand temperatures of 300 F. It is quick to cut with standard scissors or a utility knife and does not require any additional equipment for installation.

The variable speed Pneumatic Actuator is a direct drive, cam-driven actuator suitable for use in a wide range of industrial and commercial applications. It features square edge construction and a compact footprint for space efficiency.