Honeywell 13427 , Inc. 1 inch Two-Way Cartridge Cage Valve, 6.6 Cv

1" FEMALE IPS TWO WAY ZONE VALVE BO

Sometimes, the device you need to vent doesn't match the valve you already have. Your 4" Honeywell Zone Valve may be installed in an equipment enclosure, or attached to a piece of ductwork that has a 1" duct connection. In either case, this adapter allows you to use a Honeywell Two-Way Zone Valve for positive and negative pressure equalization. This adapter is 1" female IPS to male 1" pipefitters x "orifice.

This valve allows you to control your irrigation system, because it will allow water to pass through the main line when there is a signal from the remote line, such as from a rain sensor. It is designed for use with up to 6.4 ft. high-pressure lines that need a two-way zone valve and up to 6.6 Cv pressure. With its IPS female pipe thread, it can be used for vertical or horizontal piping in a zone, providing convenience as well as flexibility.

The 13427-6.6Cv 1" Two-Way Zone Valve is a two-position cage valve that separates the input flow to independent zones. The valve controls the flow of water to one or two user-specified zones through a 6.6 ft (2 m) long hose, supported by its center brace for strength.

The 13427 1 inch Zone Valve with a 6,6 CV, Two-Way Cartridge Cage can be used for a variety of applications. These zone valves are designed for use with gas or air distribution systems in residential and commercial applications. The purpose of two-way valves is to shut off or control the flow of gas to particular areas. Each individual zone is separately controlled so they can each be turned on and off depending on your needs.

Two Way Zone Valve, 2 Bolt Bonnet Design, 316 & 316L Stainless Steel Material and Cage Nut Assembly with Two 3/4" Zinc Cage Nut.

Quickly and easily monitor water flow in your pool or spa with this Zone Valve, which works with 1-1/4" or 1-1/2" pipe. Its two-way cartridge cage design features an adjustable float, making installation fast and easy. This red valve works with water up to 104°F.

Pneumatic 2-way zone valve, with flow orientation right hand. Solid brass body and spool. 6.6 Cv (21 cfm). Maximum working pressure 2.5 psig (17 kPa).