Veris Industries H-748 1/135A Adj. Current Sw W/Rly 1/135A Adj. Current Sw W/Rly

1/135A Adj. Current Sw W/Rly

1/135A Adj. Current Sw W/Rly

The H-748 has a cal scale from 0 to 135 A, or 0 to 1000 VA. The 1/135A Adj. Current Sw W/Rly is Amps, rated at 600; Current, rated up to 100 milliampere; Voltage, rated up to 600 vac. This Metal Case circuit breaker has a Catalog No. of H-748 1/135A Adj. Current Sw W/Rly and is a single pole thermal magnetic circuit breaker for use with equipment such as small motors, fans, and lighting fixtures.

Veris Industries H-748 Adj. Current Sw W/Rly

The Veris Industries H-748 1/135A Adjustable Current Sw W/Rail is a current switch with an adjustable amperage output and a solid toggle switch, which is compatible with a DC control circuit rated at 115 VAC, 50/60 Hz.

The Veris 1/135A Adjustable Current Switch with Remote is a manually-operated, fixed-size voltage and current switch with a built-in remote. This switch features manual current selection ranges from 20mA to 135A, and operates at 100V. The switch features a 5A rating that is current set by code. It works for more than merely power sources; it can also be used as an impedance controller.

The VERIS 1/135A SCHWAB Current Setting Switches feature a unique independent per-phase adjustment. These switches are used in applications where loads see periodic current changes (such as motor starter, pump, or inverter). The switch can be adjusted from 50% to 100% of rated current for precise load control. These switches are often used in applications such as induction heater or boiler control, or to adjust the output power of power supplies and inverters.

The adjustable current switcher with built-in relay is ideal for the control of higher power applications when battery supply or limited output of the controller does not allow for direct connection to the motor. The switcher is connected between the load and the controller, and functions as a null load when no power is required to run the motor. This way, continuous supply can be provided to the motor, until you decide whether to switch on or off.