Johnson Controls 283125 VG1245AFH923BUA "1/2"" 2W 2.9Cv 85-264V 2POS N/O"

1/2" 2W BALL VALVE 2.9CV; SS TRIM; HI TEMP LINKAGE

The Johnson Controls 283125 VG1245AFH923BUA ball valve is SS trim, hi-temp linkage 1/2" 2W ball valve. BALL VALVE, 1/2",DV20, SS, H/T LINKAGE

With its stainless steel ball and stem, this Series 283125 2W 2.9CV 85-264V SPD RATED N/O HI TEMP BALL VALVE from Johnson Controls is ideal for corrosive services. It comes with a ground lug on the side.

Johnson Controls Ball Valve, Model VG1245AFH923BUA, 2W 2.9CV, N/O Connection, 90 Deg F [Max], C [Min], 0 [Ambient], S [Sub], Flush Mount Terminals, ANSI Class 200, CSA Class 12

With the VG2-45AFH923BUA, Johnson Controls has essentially taken a ball valve and squeezed it down so small that it will fit into tight spots such as narrow tubing or small plumbing. This unit, which is suitable for use in temperatures ranging from -20 to 200 degrees Fahrenheit, is built with a stainless steel trim and high temperature linkage.

Johnson Controls 283125 VG1245AFH923BUA High Temperature 2-way Ball Valve, 115/230 VAC, 1 Phase, 60 Hz Power Supply, 1/2 in Nominal Diameter, 2.9 Cv Maximum Flow Pressure Rating, Brass Body Material

The Johnson Controls 283125 VG1245AFH923BUA 2/2 Valve is designed for 208-230VAC operation. The 2W ball valves are suitable to control hot water in residential dwellings.

The Johnson Controls VG1245AFH923BUA is a 1/2" Ball Valve which is mainly used for Oil, Steam & Gas lines.

The VG series of ball valves from Johnson Controls features an higher-end engineering and design for applications that require long life and dependable performance. The construction consists of a robust cast iron body, forged brass stem and 3/8-16 threaded bonnet with a stainless steel spring and externally adjustable max pressure and temperature and full port ends and cotter pin.

JB Systems 2 Way 2 Position White Actuator for Commercial and Residential Bathroom Fixtures – – – – – – – – – – – – – – – -Made in Italy — — — — — — — — — — — — --Brass Trim and Nut, 1/2"" NPT Air and Water Ports .025"" thick

High Temperature Protection. PTC thermistor in actuator body opens circuit to limit device operation during over-temperature conditions.

A ball valve is a type of valve used to control the flow of a liquid or gas present within a system. Ball valves are a very popular option that can be found in a variety of different industries. The valve you have chosen has been rated as one of the best for certain applications.