Johnson Controls 283313 3/4" 2W BALL VALVE 4.7CV SS TRM NSRVA9104-GGA-3S

3/4" 2W BALL VALVE 4.7CV; SS TRM NSRVA9104-GGA-3S

Johnson Controls 3/4" 2W BALL VALVE 4.7CV; SS TRM NSRVA9104-GGA-3S

Our Johnson Controls 283313 SS TRM NSRVA9104-GGA-3S 3/4" 2W BALL VALVE 4.7CV is a replacement for your existing water valve, and provides new valves and supplies. It has corrosion resistant materials and meets ASME rated.

The 3/4" 2W Ball Valve 4.7Cv - Stainless Steel Thermoplastic Rubber (TRM) Non-Sealed Remote Vented actuator is designed as a replacement for the Raypak Raypak Raypak Raypak Raypak Raypak Raypak Raypak Raypak Raypak Raypak Raypak Raypak Raypak Raypak Raypak Raypcak raypcak raypcak raypcak raypaka V851A and V852A

Johnson Controls'; new 2W ball valve and 4.7 CV straight pattern inlet, offers added durability and flexibility in the field. The valve is designed with a stainless steel body and bonnet with a durable silicone rubber elastomeric sleeve for longer life. The 283313 2W ball valve accommodates all 1/4" male pipe connections, and features an internal o-ring, threaded inlet and outlet ports, 360 degree swivel spout, and a flexible handle.

Johnson Controls 3/4" 2W Ball Valve is ideal for use in steam, air, water, natural gas, refrigerant and other liquid systems. It has a medium pressure design which allows the valve to be used with piping systems having pressures to 450 psi maximum. It can be used up to 650 psi when installed in an external pilot application.

Johnson Controls' 2W Ball Valve is a general-purpose, straight through valve that is used in liquid and air systems. The 3/4" ball valve is made of stainless steel. It has a minimum temperature rating of -40F (-40C) and maximum temperature rating of 250F (120C).

Johnson Controls' 2W Ball Valve with needle seat is made of Stainless Steel for superior corrosion resistance. Ball valves are commonly used to regulate flow, or to isolate components from the main line or process fluid. Johnson Controls uses a robust design for this ball valve. It is rated 2W, which means it has a service temperature between 450 and 550 degrees Fahrenheit.

Specifically designed for Solar Thermal Systems, this 283313 2/3" ball valve is engineered for very low loss and high flow. It features stainless steel body, stem and trim with an operating temperature of 125° C (257° F).

A single-water ball valve used to control flow of water in hydronic heating and cooling systems. Features durable stainless steel construction and a thermoplastic (TPR) handle. Center-to-center spacing is 1 1/4".

Delta's 1/4 to 3/4 Ball Valves are used to regulate wastewater discharge by diverting flow. The white polypropylene ball is held against the stainless steel seat under pressure from a diaphragm or membrane that develops an airtight seal at the same time it releases the ball to allow flow.

The Johnson Electric Ball Valve is used for control of flow through a piping system, isolation of the fluid being conveyed , or for switching of fluid flow.

Industrial quality for boiler plant use.