Johnson Controls 283682 1-1/2" 2W BALL VAL 29.2CV SS TRIM SPRING CLOSEDWI

1-1/2" 2W BALL VAL 29.2CV; SS TRIM SPRING CLOSEDWI

Johnson Controls 283682 1-1/2" 2W BALL VAL 29.2CV SS TRIM SPRING CLOSEDWI

This Johnson Control part number 283682, 1-1/2" 2W BALL VAL 29.2CV, from Johnson Control company is a spool valve trim.

The Model 283682 from Johnson Controls is a 1-1/2" 2W Ball Valve with 29.2 ft lb. Closer Wrap 180° Opening Angle, 316 Stainless Steel Trim and Coil Spring Closure featuring a Carbon Steel Body and Ball Design with 00000 Assembly Threads.

SCHEDULE 40, STAINLESS STEEL VERSION; SPRING CLOSED VALVE; DISCHARGE NOMINAL 1-1/2"; INLET NOMINAL 29.2mm; OUTLET NOMINAL 37mm; TRIM RANGE 5-7/8" (146mm)

ROUND BALL VALVES, STAINLESS STEEL, CLOSING TYPE: NON-CLOSING, WATER SERVICE: GAS, 2W. FOR USE WITH SOFT TUBING. Consult Factory for specific applications.

Ball valves are directional hand operated valves that direct flow of liquids and gases. They are used to control flow in either direction for on/off operation. This ball valve has a minimal seat height of 1-3/8" nominal, 2" minimum. The bonnet design features trimmable length adjustment for fast alignment, and eliminates the need for procedures such as reaming or boring to obtain fully tightened gland seats. The bonnet features a tough spring steel locking pin extended into the body to lock against the socket escutcheon retainer face. This assembly is designed to prevent bonnet creep-back providing positive system shut

The 283682 is an industrial grade stainless steel tristate ball valve. This ball valve is rated for 30 PSI, has a 2-way non-metallic stem, and comes with a manual lever along with an integrated spring-loaded actuator.

These trim-to-fit springs are perfect for replacing old, worn springs on 5/16" fence posts. Each Trim-to-fit "WF" Wire Fence spring is a 10 ft section of carbon steel, seamless round wire. Pre-tinned for easier soldering

Ball valves are used for shut off purposes, either manually by hand lever or by a mechanical actuator. A ball valve has one inlet port and one outlet port. The valve body is hollow, except for the ball that is always located in the center of the valve to control flow.

The Johnson Controls 283682 enclosure ball valve is used for on/off control of the flow of liquids, air, steam, gas, or slurries. The ball valve can be used in non-critical applications where quarter turn operation is acceptable. It has a minimum flow of 3 SCFM @ 100 PSI and a maximum working pressure of 250 PSI.

Ball valves are used to control liquid or gaseous mediums in the piping system. It is composed of a pipe body with a movable hollow needle called ball valve disc inside it. There are key ways inside the hollow needle which regulate the flow of liquid or gas into the direction you want it to go. Ball valves are made if various types of materials like bronze, iron, brass, bronze alloys, etc. If you are looking for ball valves suppliers in India, 1stworldgroup is one of your best partners for trustworthy and durable ball valves equipment at affordable prices.

When you look for the finest materials, only the best will do. Our Johnson Controls ™ brand cables are manufactured to meet stringent American Society for Testing and Materials (ASTM) standards. Each cable is sheathed with an ultra-durable double helix braid for added protection against mechanical damage. They're all perfectly designed to reduce installation errors.