Johnson Controls 284114 VG1841AD+923BUA "1/2"" 3W 1.2Cv 85-264V 2POS S/R"

1/2" 3W BALL VALVE 1.2CV; BRASS TRIM SPRG RTN CCWO

The Johnson Controls 284114 VG1841AD+923BUA is a 1/2" 3W ball valve, made of brass with trim sprig return connections clockwise (CWO) and nickel plate handle. Works on 85-264VAC at 2 positions provides compliance up to NSF61-5 certification.

A 1/2" 3W ball valve for use with steam, hot and chilled water, oil, and other mediums. This ball valve is cast brass with a brass trim stop reverse combination stem and has a 15/16" bore and 1-1/4" NPT female inlet and outlet.

The VG1841AD+923BUA is a 3W 1.2Cv DPDT solenoid ball valve designed for use on commercial and industrial water supply systems. The valve has a brass spring return trip lever and a nickel-plated brass seating.

The Johnson Controls 284114 VG1841AD+923BUA "1/2"" 3 WATT 1.2 AMP 85-264 VOLT 2 POLE SERIES 'B' UNIT WITH REPLACEABLE CUFF LIMITS SIGNAL BALL VALVE is a combination plumbing/electrical ball valve, designed to operate as a single pole switch from 0 to 15 volts AC from a logic controller.

The 284114 is a 1/2 inch pre-wired AC, pneumatic, solenoid valve with brass trim which opens to the CLOSED position when activated. It also has main contact rated for 115 VAC/ 60Hz MSPB S, normally open contact rated for 115 VAC/ 60Hz MSPB O, adjustable threshold for both NC and NO contacts rated at 1Amp or 15VDC & 1/8 orifice diameter.

Ideal for use with indoor heat pumps and furnaces, the VG1841AD+923BUA is a single-operator, thermostatic cartridge valve rated 1/2" NPT. It features an EPDM seat, brass trim/snap ring retainer, flat spring-retaining ring, ball seats and alloy housing.

Adopting new advanced technology, VG1841AD+923BUA products are developed for commercial and industrial sectors. The 285W VG1841AD+923BUA provides 1/2" ball valve control function. It also works on wide voltage range 85-264Vdc, which reduces the risk of power quality fluctuation. Due to special plastic material of shell and cover, this series is featured with anti-corrosion ability, high temperature stability and high shock resistance.

Designed for washdown and industrial applications, the VG1841AD+923BUA ball valve is made of brass and features a durable stainless steel spring retainer with quick connect disconnects. Its 1/2'' inlet and outlet ports enable easy installation in a variety of industrial equipment.

The VG Series ball valves feature built-in strainer and elements as standard. They are available for 1/2" male NPT, 1/2" female NPT, 1/4" male NPT, 1/4" female NPT and 1/8" male NPT connections and three different stem and handle options: 1/8NPT (chain and handle), 1/8NPT (threaded stem) and 3/16" POM (threaded stem)

This Johnson Controls 284114 VG1841AD+923BUA is designed for use with 9618-S008-0131 manifold, Back pressure 2-3/8""W x 3-1/8""H x 24-7/8""O. Maximum flow 1/4" mps@100 psig. Nominal trac...

Johnson Controls offers a complete line of industrial controls which are designed for replacement applications by OEMs.

An electricity regulation device controls the flow of ac power to equipment by reducing or interrupting electric current. This permits the harvesting of excess power available in some AC circuits. Solid-state electromechanical devices directly regulate the voltage by interrupting the current; mechanical devices change resistance, which causes a change in current.