Johnson Controls 284681 VG1845AGH923BGA "1/2"" 3W 4.7Cv 24V 2POS S/R N/O"

1/2" 3W BALL VALVE 4.7CV; SS TRIM; HI TEMP LINKAGE

Controls 284681 VG1845AGH923BGA" is a 1/2" 3W BALL VALVE 4.7CV; SS TRIM; HI TEMP LINKAGE. It provides a flow rate of 0.04 GPM and a cut in pressure of 48 pounds per square inch. It comes with wire leads, spade terminals, hot in line, and a lead free construction that meets NEMA L21-3 standards. This device is easy to install and has a thermal trip set point of 248 degrees Fahrenheit when ordered from Johnson Controls Operational in buildings such as medical facilities, research

The Johnson Controls 284681 VG1845AGH923BGA 1/2"" 3W Ball Valve 4.7CV is ideal for industrial, commercial and residential applications. This ball valve has a bronze body with brass trim. It is designed to control the flow of water; it provides positive shut off in both the open and closed positions. It has Hi-Temp Linkage. It can withstand system pressure of 125 psi (863 Kpa).

Johnson Controls® VG1845AGH923BGA 1/2" 3W TRIM BALL VALVE 4.7CV 2 POS S/R N/O Item: 1/2" 3W 4.7Cv Ball Valve Manufacturers Part Number: VG1845AGH923BGA

This ball valve is made of stainless steel. The size is 1/2" 3W. It has 2 ports and 2 posi-seals connections. This ball valve is 2-position ON/OFF normally closed, it does not have manual operation, position indicator or secondary position seal provided.-SS TRIM

The Johnsonball valve features a balanced design to help ensure smooth and reliable control. Designed for use in high-temperature applications, the valve includes a SS trim and balanced design and stainless steel components throughout to help ensure durability and reliability. The linkage is manufactured with stainless steel rod and stainless steel ball for added strength.

The VG1845AGH923BGA is a 3/4" globe valve designed for use in 1/2" through 4" pressure systems. The body is formed cast steel with crevice-welded ends and a ductile iron disc orifice. Stainless steel trim is standard. The 1/2"-14 NPT male threaded end connections are interchangeable with similar valves in most industrial SAE series sizes. Features:

This ball valve is used with control horns and logic valves to manually start and off of the boiler and pump. With a cast iron body and 3/4" NPT connection it has a 1/2" male threaded cast iron ball and cast iron swivel nut. This product was made in the U.S.A.

Johnson Controls® ball valves are designed to operate in applications where large flows require a steady valve, such as water supply systems to residential and commercial buildings.

A ball valve provides the flow control you need in precise and variable amounts. It allows for precise and repetitive delivery of fluids, and with its simple design you receive maximum flow with minimal energy loss.

The VG series are rotated ball valves are designed with a Nylon seal, both in single flow and 3-position application. These valves are used to regulate fluids in many industrial applications. These valves are also commonly used for plumbing applications.

Our Price$575.00, 50 in stock