Johnson Controls 284689 VG1845AGH943BGA "1/2"" 3W 4.7Cv 24V 2POS S/R N/C"

1/2" 3W BALL VALVE 4.7CV; SS TRIM; HI TEMP LINKAGE

1/2" 3W BALL VALVE 4.7CV; SS TRIM; HI TEMP LINKAGE(.175-32UNF 4BSP).

The VG1845AGH943BGA is a 1/2" 3W Ball Valve with 4.7Cv. It has SS trim and Hi Temp Linkage.

Our Johnson Control Valve is a 1/2" 3W Ball Valve 4.7Cv 24V application designed for use with gas supply systems ranging from low to high pressure. This valve has an SS Trim and operates at a minimum ambient temperature of -40 degree F (-40 deg C) and a maximum ambient temperature of 200 degree F (93 deg C).

The new family of 1/2" Johnson Controls VG valves, with pre-engineered designs, are designed to meet the new low-lead requirements for ball valves as defined by ASME B16.34 2008. In some cases, valve bodies will need to be replaced as part of a retrofit. This 3W 4.7Cv valve is suitable for food and pharmaceutical applications and operating ranges of -40 deg C to 230 deg C.

The Johnson Controls 284689 VG1845AGH943BGA 1/2" 3W Ball Valve. It's made in China. The lever measures 2.5" long and the stem measures 1".

Johnson Controls' VG1845AGH943BGA 1/2" 120V 3W 4.7Cv 24V 2Pos Poz Valve is ideally suited for many industrial, commercial, and residential HVAC equipment applications including HVAC duct heater, fan coil terminal units, packaged terminal air conditioners, geothermal heat pump equipment, and all-season central air-conditioning systems.

Our VG1845AGH943BGA is an industrial subbase temperature control valve designed for commercial applications. This thermo zone valve features a compact, DIN-rail mount design with an electromechanical actuator. It is normally closed, but will open when its zone temperature is exceeded. This therm zone valve, which comes standard with the following stainless steel trim options: stem-in/stem-out/thru type, has a high temperature linkage connection.

The VG series ball valves in a 1/2in size are used for manual control of flow in a closed position. They consist of a formed steel body, trim & bonnet and a spool formed from brass for steam service temperatures up to 250 degrees Fahrenheit.

The Johnson PV1 is a 1/2" ball valve for discharge line that features an Aluminum stem and mounting nut. It can be used on various gas and liquid chemical applications.

This is a 2 position, normally closed, pilot operated electronically commutated valve with pilot signal suppression. It has a 3/8'' pilot connection and comes with a 2'' conduit body and a short stem pilot switch body.

Seamless drain and suction applications as well as complete control over your systems as an integrated part as deep as 650 feet.

A Johnson Controls energy-efficient valve is just the thing to regulate temperatures in laboratories, air conditioning units, and fiberglass pipe insulation. It's sturdy construction ensures lasting performance over multiple decades in these demanding settings. This solid-state valve is rated up to 250°C, is appropriate for use with 24V power supplies, and also features thermal protection. The device boasts essential features like a restricted flow setting, an operating temperature range between -25°C and +90°C (-13°F to 194°F), and can actuate both normally open or normally closed functions via process material temperature