Johnson Controls 284696 1/2" 3W BALL VALVE 4.7CV SS TRM NSRVA9104-GGA-2S

1/2" 3W BALL VALVE 4.7CV; SS TRM NSRVA9104-GGA-2S

Johnson Controls 284696 1/2" 3W BALL VALVE 4.7CV SS TRM NSRVA9104-GGA-2S . Rely on Johnson Controls to provide you with the reliable products you need. This 1/2" 3W BALL VALVE 4.7CV is covered by a two-year limited warranty for your assurance and comes from a trusted supplier that can provide timely delivery.

The johnson controls 284696 1/2" 3W BALL VALVE 4.7CV SS TRM NSRVA9104-GGA-2S is personified to be a tempting offer in the market because we think nobody can beat our prices and quality of the johnson controls 284696 1/2" 3W BALL VALVE 4.7CV SS TRM NSRVA9104-GGA-2S . So, if you are looking for johnson controls 284696 1/2" 3W BALL VALVE 4.7CV SS TRM NSRVA9104-GGA

Johnson Controls 284696 1/2" 3W BALL VALVE 4.7CV SS TRM NSRVA9104-GGA-2S

Johnson Controls 284696 1/2" 3W Ball Valve 4.7CV, OSS Trim, Nickel Silver, Standard Flow, Stainless Steel

The product is a 3/2-way ball valve, the 4.7CV size and 352-SS body can be installed directly, and is used for controlling and adjusting the flow and direction of water and steam in industrial production equipment; it also used for conveying and regulating the temperature of fluids. The process ball valve adopts non-sealing structure, the flow medium usually is steam or water/glycol, because it uses non-sealing structure to prevent flow media leaks caused by operation. The main technical parameters are as follows:

The 284696 Ball Valve offers high flow and Torricel Flow Control Needle Assembly Offers fully proportional maximum flow-rate control to help ensure stable, consistent flow. With the application of a slight force, you can easily turn Needle Assembly to increase or decrease flow-rate according to exact requirements.

Four ball type valves are designed for the service control of air volume without throttling. The four ball design has an integral seal, so there is no risk of contamination, even if the valve becomes partially open.

With a variety of high-quality ball valves, Johnson Controls offers the right solution for many industrial and commercial applications. These valves are available in a wide range of sizes that can be combined to create various configurations. Various seal types are also available, including metallic seals. Aluminum bronze is recommended when exposed to corrosive materials or aggressive chemicals.

Standard orifice four way solenoid valve, pneumatically actuated, balanced spool assembly with compensator bleed, pneumatic power circuit 24 VDC, 110 psi max. actuating pressure, stainless steel body and spool, gold anodized aluminum spacer ring, stainless steel ball.

Meets or exceeds applicable industry standard, NSF Standard 41 & NSF Standard 61

A ball valve is a type of valve used to control the flow of a liquid or gas. At an earlier time, check valves were often employed, but have been replaced by the ball valve. It is useful in situations where precise control of the flow-rate or direction of flow is necessary.

A valve is a device that regulates, directs or controls the flow of a fluid (gases, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. Valves are technically fittings, but are usually discussed as a separate category. In an open valve, fluid flows in a direction from higher pressure to lower pressure.