Johnson Controls 55564 , Inc. VG2431UM845E00 3-IN FLNG 2WAY NC W/ACT 9-13

3" FLANGED 2-WAY N.C. PNEUMATIC VALVE ASSEMBLY MP8

3" Flanged 2-Way NC Pneumatic Valve Assembly MP8 Lead free brass diaphragm for extended life, -40 to 160 PSI pressure range, 6 gpm liquid flow, 6 PSV duty cycle, Pressure compensated stem seal, Brass body construction.

3" Flanged 2-Way N.C. Pneumatic Valve Assembly, Metric, Viton Seal With Adjustable Fixed Esprit Pressure Relief Valve, Factory Installed Actuator

This 3" flanged 2-way N.C. pneumatic valve assembly has an EPDM diaphragm. It is used to sense the position of a pilot signal and then transmit it to a primary control circuit (normally N.O.). The pilot signal activates a pilot-operated switch, which in turn activates the output of this valve assembly. An ejector pilot, located in the pilot chamber of this valve assembly, works in conjunction with a pilot spring to sense pilot pressure. The pilot pressure causes a compartment pressure differential that regulates the thrust force needed to close or open the spool seat.

The Johnson Controls 55564 , Inc. VG2431UM845E00 3-IN FLNG 2WAY NC W/ACT 9-13 PNEUMATIC VLV 9" is a 24 VDC, 0.06 S.F., 2-way pneumatic valve assembly with a PN16 connection, a 3-inch flanged body, and a 2-position switch. The downstream trip time for both positions is 9 seconds. The PN16 connection has a Male Pipe Thread x Female Pipe Thread connection.

The 55564 is a 3 inch flanged 2-way non-directive pneumatic valve assembly that features brass body construction, Buna N diaphragm, spring loaded balanced poppet, mandrel wound coil, partial porting and swivel nuts. This assembly is actuated by -0/-0/+10 in H20 with CFM per 100PSI rated.

The 55564 is designed with a three-inch flanged two-way non-corrosive metal pneumatic valve assembly, used for process gas control applications in liquids and gases with a temperature up to 300 degrees Fahrenheit.

This Johnson Controls 55564 is a 3 in valve that is normally closed. This Two-way pneumatic valve assembly has a metal body and is . This 55564 can be set to ON, OFF, or AUTO. The Country of Origin for this control is Taiwan. The Normally Closed (NC) means when the actuator is in the close position the valve will flow gas; in this case air. With actuation/control in the far right position, this Johnson Controls 55564 is set to auto.

Pneumatic Tube Assembly, Bypass w/o Slip Test&Alarm, Size #8

The 2-way valve assembly includes a spool valve, a diaphragm indicator, a pilot solenoid, a pilot check valve and a steel ball check valve. The two-way pilot valve provides positive control for high and low flow requirements when plugged into the appropriate field position.

Two-way valves power a variety of HVAC systems. Single-port design with non-locking air inlet. Use with 3" tubing. For use with non-freezing fluids only. Allows two Zones to be controlled from one Zone rough-in valve or single zone to be modified to two zones or multiple zones to be controlled from the same rough-in valve.

Compact, versatile and engineered to meet specific program requirements, Compumotor's Summit(TM) drives are operated manually or by programmable logic controller (PLC). Easy to set up and use, they offer several features, including hard-wired control options, simple menu-driven programming for easy parameter setup, high-speed stepper motor drivers, integrated drivers for other accessories, and built-in capabilities for the future. All of these features enable you to choose a drive that meets your current applications as well as the demands of future expansion.