Johnson Controls 6197 VG7441RT "1.5"" PDTO 28.9cv ValveBody"

"1.5"" PDTO 28.9cv ValveBody"

The Johnson Controls 6197 VG7441RT "1.5"" PDTO 28.9cv ValveBody" is a component that is used to shuttle pressurized refrigerant around commercial and industrial refrigeration systems and is built to withstand heavy duty usage and environments. It features:

The VG7441RT is a 1.5"" PDTO 28.9 CV valve body that can serve as a replacement part for Johnson Controls 4000 Series valves.

The PDTO valvebody features a 1.5"" body and is designed for use in wet/dry vacuum systems where high discharge flows and high vacuum capacity are required. The valvebody is designed to operate in a wide range of discharge and vacuum pressures and temperatures, and the unique thermostatic relief control (relief pressure = 3.1"" WC and relief temperature = 270°F) works with the safety relief valves to protect the end user from over pressure failures.

The Johnson Controls VG7441RT ValveBody is built to provide exceptional service and performance. The VG7441RT ValveBody is built to last, with its reliable construction. If you are looking for ValveBodies that offer an increased maximum pressure or flow capacity, then look no further than this product, the VG7441RT ValveBody, by Johnson Controls.

The Johnson Controls 6197 VG7441RT ValveBody delivers higher flow rates and more power than ever before. Designed to save space and lower installation costs, this increased performance valvebody gives you increased versatility and reliability in your piping system for maximum efficiency.

Performance Proportioning Valve Body, Compact modular displacement manifold with a 1.5"" CS port for a modulating flow control valve or ball valve, Requires one position on the pressure sender, Designed to work on natural gas, low sulfur gas and propane applications, Quick Modular Valve Change (RMV) makes it possible to replace a failed control device without draining the system dry

The Johnson Controls (Vogel Valves) VG7441RT is a direct-acting two-way, normally closed, precision electronic valve with integral rod that adjusts the seat gap. The VG7441RT valve body has an integrated temperature compensated seat gap adjustment rod, which enables the end user to compensate for thermal deformation (change due to temperature) of the pipe and gasket. The VG7441RT also has an integrated purge air module that purges the entire pipeline by expiring process gas.

With our patented technology, Johnson Controls designs and engineers innovative techniques for the safe, effective operation of valves. Our experts are experts. And they are ready to assist you.

A Square D brand with gold color disk, square printed on the nameplate. This square D BUSPLOW series single phase product is made with green material in compliance with UL/CSA standards in North America.

In addition, the VG7441RT is designed with a pressure-regulating valve body, which offers two different control modes: the mode 1 setting allows the operator to enter a lower water cutoff pressure to protect fixture components that may be susceptible to freeze damage, and the mode 2 setting provides a higher threshold for more resilient fixtures.

Designed for multiple applications, Johnson Controls' VG7441RT utilizes a self-contained, fluid-filled body that provides a long service life and compact size. The valve incorporates direct electric heaters and a thermistor to deliver immediate control of flow temperature, eliminating the need for preheating. The standard 256-position microprocessor-based electronic adjustment gives you precise control.

Voltage selection switches are provided to allow selection of different nominal voltages for two alternating frequency (50Hz, 60Hz) power systems. A time delay setting (10-30 seconds) is built in to limit inrush current when switching between power systems in order to prevent inrush damages. Various customer-selectable timing options are available.