Johnson Controls VG7441ET+3008E Globe Valves with V-3000 Pneumatic Actuator, Brass Trim, 1/2 Npt

"1/2"" 2W NC 9-13# 1.8CV"

VG7441ET+3008E Porcelain Enameled Globe Valve B500, SET (1/2" 2W NC 9-13# 1.8CV), with Mini Handle and Connector

A brass trim, globe valve combines maximum flow with excellent thermal stability to accommodate most differential pressure requirements. The VG7441ET+3008E is equipped with a 2W NC pilot operated pneumatic actuator to control valve position.

Two-way brass globe valves with pneumatic actuator. Pneumatic control actuators can be used as direct reversing, reversing after a sequence time delay, proportional forward/reverse and proportional action. The Actuator Autotranslator, available as an accessory, allows for time savings in programming and troubleshooting by incorporating the functions of the actuator into the panels programmer or logic controller and providing feedback and diagnostics on the status of the actuator and valve. Three convenient solenoid actuator power options: AC hardwire, AC plug-in and pneumatically powered 5/8" NPT port or

The VG7441ET+3008E Globe Valve with V-3000 series actuator is a 1/2"" diameter 2-way ball valve features a non-rising stem for throttling applications that require a high level of leak resistance. The VG7441ET+3008E comes with a bronze body and brass trim along with an adjustable nylon seat for enhanced pressure/leakage characteristics.

The VG7441ET Globe Valve is designed for use with either hot or cold water. The 2-way flow control, provides global operation. The solenoid is factory installed with 3/8"" NPT thread port.

With the proud support of Johnson Controls, SONNENGLAS introduced 4 sizes of globe valves in brass or chrome finish. Each valve can be used in both fresh water and seawater, so it provides better safety in marine environment. The V-3000 version has a built in solenoid valve, Pneumatic actuator type.

The VG7441ET+3008E Globe Valve Connector Valve is brass trim with ½" female NPT port for connection to pneumatic actuator.

Offering complete solutions for valves, controls, actuators and piping systems, Johnson Controls Valve & Measurement Technologies – VMT – provides a comprehensive portfolio of products tailored to the specific needs of the HVAC&R industry. In addition to reliable products that help you save energy and water, Johnson Controls believes that a safer world is within reach. Doors, windows and lights from Johnson Controls help you do more to safeguard people's lives, property and environments from harm's way. For safe consumption of food and beverages, Johnson Controls is also proud to participate in the fight against counterfeiters through our innovative electronic components used in water

A globe valve is designed with a disk-like body and a round bonnet, and can be manually or automatically controlled. The rounded "cock" on the valve slides back and forth within its casing. The open and closed position is fully visible because there is no cover like on gate valves. Globe valves are available in two different styles: ball and nut or ball and pin.

Compact, full bore design reduces installation and operating cost. Available in brass body and stainless steel trim versions.

The VG7441ET+3008E Series globe valve is designed to control the flow of gases, vapors, liquids, steam, water, oils and other fluids in industry. The VG7441ET+3008E Series are used where high temperature resistant valves are required or for heating applications to 400°F / 204°C. The VG7441ET+3008E Series valves are generally used in piping systems up to 1200 psi / 8.3 MPa.