JOHNSON CONTROLS VG7000-6001 VG7000-6001 PACKING KIT - BRASS TRIM

PACKING KIT - BRASS TRIM

This Packing Kit is used to convert a gravity air register into a pressure packed system. This kit includes a brass Trim that must be used to change the air control from a gravity air system to a pressure packed system. Please note that it will require a customer supplied brass bulkhead and plug set. The code for this Packing Kit is VG7000-6001-

This brass trimming is designed for models AM15Z, AM15ZT, BFK5Z, BFK5ZT, BRKK5Z. These kits include one mounting bracket and two compression terminals for each of the two condensate drains on the back of the unit.

The ideal addition for a central air conditioner system, a packing kit allows your air conditioner to properly stay in place while reducing the movement that causes unwanted noise. It's packed with an assortment of parts intended to quietly sandwich the loose pipe between two tightly-attached pieces, and can be easily installed onto any compatible unit.

The 3/4"-brass packing nut and Packing Nut O-ring for the Johnson Controls #FG070, FG071, FG072 models.

When replacing Johnson Controls gas valves, it is important that the original packing kit is used. The kit comes with burn stop ignition kit that prevents flashback.

The VG7000-6001 provides the superior technology of variable frequency drives in a travel size, reliable power package. The Travel Packing Kit contains all necessary components to retrofit the VG7000-6001 to be used with remote power controllers.

This kit includes all the hardware you need to convert your LG or Samsung front loading washing machine into a horizontal or vertical pedestal washer. The kit includes the following:

Trim kits for Johnson Controls Versi-Pacs are the original heating and cooling systems for many OEMs. Versi-Pac II is a high efficiency capacitor system that can be used as primary or supplementary heat to your vehicle, or coolant to the air conditioning system.

This is a Genuine Replacement Part (not aftermarket) made by Johnson Controls for use with the following: 6001 Series Ventilation Components.

This stem thermometer is designed for dry bulb installations with lead length of 7-1/2". Measures the temperature of the water in steam, hot water heating and chilled water lines. The thermometer provides easy visibility with a large dial face and rotating probe.

JOHNSON CONTROLS offers over 50 finish options in our commercial thermostat line. Our exclusive color rendering software enables you to visualize the finished commercial thermostats prior to purchase, for increased design flexibility.