JOHNSON CONTROLS TE-6001-8 TE-6001-8 AVERAGING ELEMENT HOLDER **** SOLD

AVERAGING ELEMENT HOLDER **** SOLD

This is a Johnson Model TE-6001-8 Averaging Element Holder. The metal contacts are present, but are rusted off. This item is in used condition, but appears to be in good condition. This item has been sold as is.....

For sale is a small-medium size averaging element holder. From inside the elements measure 20" The are not areally areally scratched or have any pitting, the outside looks fine as well.

The TE-6001-8 Averaging Element Holder is designed for the 30,000 BTU/hr. TE-6010-8 unit. This unit is used to create water vapor, which is circulated by all ventilation components, using only lamp oil as a fuel.

This Johnson Controls TE 6001-8 averaging element holder is new without tags. This will work on all of the control boards with output signals of 5 volts, 10/5 mA, 11/4 volts, 20/10 mA, or 30 mA.

Designed to hold one TE-6001-8 element. Mount the averaging element holder above the daily calibration temperature on the control board to minimize temperature errors on average temperature controllers (e.g., REW-3000) during temperature ramps.

Generator averaging element holder, TE-6001-8, for Johnson Units.

The TE-6001A is an average element type holder designed to fit older Johnson Controls meter bases. It is usually mounted onto the left side of the meter. You can find your new TEC element or accessories by looking up your old meter model number on our website under the "select a product" drop down menu, then using the "technical parts" drop down menu on the new page to locate your specific element.

The TE6001/TE6002 Element Holders are designed to allow mounting of small element samples to be used in furnace Type K, J or T thermocouples. The holders are made from zirconia alumina ceramic.

The TE-6001-8 provides a convenient storage location for the TE10021 elements. The mounting frame is constructed of stamped, galvanized steel. Mounting screws are supplied to mount the frame on the wall.

JOHNSON CONTROLS TE-6001-8 BUILT ON THE JCI/JOHNSON CONTROLS A-LINE PLATFORM, THE NEW TE-6001-8 MANUFACTURED IN USA. THE UNIT COMES WITH SERVOCOUPLERS, CONTROL PANEL WITH LED DISPLAY, 8 ? DC AMP SUBTRACTION POWER SUPPLIES.

Manufacturer: Johnson Controls Materials of construction: stainless steel and polycarbonate tubing, polycarbonate housing Type of pressure elements: natural gas / LPG Connections: a screw-type connection to a gas framework Max. working pressure: 2,0 MPa Technical parameters: Rated current 16 A Max current 23 A Rated voltage 120/240 V Output 4 kW Voltage tolerance 5 % Compressor capacity 19 m3/h Flow rate at nominal pressure 85 L/min Volume speed 8 m3/hr Weight approx. 4,2 kg Circumference 45 mm Length 138 mm

Pressure compensated secondary air holder. Compatible with most thermocouples manufactured by Johnson Controls, Beckman Coulter, Tempsens, and ESA. GS-1/32" O.D. x SC-10-Gum grade.