Johnson Controls TE-6001-1 DUCT TEMPERATURE ELEMENT MOUNTING ASSEMBLY

DUCT SENSOR HOLDER W/HANDI-BOX

The TE-6001-1 is a suitable substitute for the following Mercury HMD6, R1308. Cold Channel Duct Sensor Holder with Handi-Box.

Designed to enable the TE6001-1 to operate in both air duct environments and free-field environment, this mounting assembly accommodates the TE6001-1 probe connector. The heavy duty Duct Sensor Holder is compatible with any standard 4" round or rectangular air flow grilles (15/16" x 1 1/4" or 18/32" x 1 3/8"). Removable mounting bracket, patented locking device, and handi-box for convenient storage. Parts are available separately.

The TE-6001-1 DUCT TEMPERATURE ELEMENT MOUNTING ASSEMBLY is used to install a TE-100 Series Temperature Element into an air duct. The assembly includes the main thermal sensor mounting plate with Duct Handi-Box for mounting in various duct sizes.

Johnson Controls TE-6001-1 DUCT TEMPERATURE ELEMENT MOUNTING ASSEMBLY - FOR USE WITH Johnson Controls' NTC Series, The TE-6001-1 is a duct mounting assembly with a Handi-Box.

The TE-6001-1 is a mounting assembly for a TE-59BAB surface mounted duct temperature element in a handi box.

The TE-6001/H is a mounting assembly for use with the TE-6001 Duct Temperature Sensor. The assembly may be secured to the top of the HVAC system using screws (not supplied).

The DUCT TEMPERATURE ELEMENT MOUNTING ASSEMBLY is a Johnson Controls standard replacement part. These optional assemblies are available in stainless steel, aluminum, and plastic finishes.

Keep the temperature of AC ducts between 45°F and +110°F (+/-5°C). Designed to detect temperature in small louvers in the heating, ventilating and air-conditioning (HVAC) industry. This package includes set screw, mounting bracket, sensor with removable connector .

This unit is typically mounted in the duct and measures the air temperature. Duct mounts also

The TE-6001-1 is a 4-wire duct temperature element screw mounting assembly. Dimensions: 900H x 38W x 25D mm. It has a cable length of 50 feet and a BNC connector on the end. This part is made from polycarbonate, thermoplastic elastomers, and zinc alloy materials.

The TE-6001-1 Mounting Assembly is for the TE-6001, TE-6002 and TE-6K007.

The TE6001-1 is a replacement part for the 3200 series. It fits multiple models of Johnson Controls Handi-Dose units. This item measures approximately 2 5/8 inches wide by 4 1/4 inches long by 3 1/2 inches tall.