Johnson Controls 37461 VG7241CS+3801B "1/2""npt N/O .73cv 3-6# BrzVlv"

"1/2""npt N/O .73cv 3-6# BrzVlv"

Control your heating and cooling costs, improve comfort and extend the life of your HVAC equipment. The Johnson Controls VG7241CS+3801B "1/2""npt N/O .73cv 3-6# BrzVlv" is a set of 7 solenoids that can be used for your HVAC system. They are designed to provide a non-pneumatic actuator for commercial and industrial applications, in a sealed enclosure with a 1/2"" inlet NPT connection and a 3-6 Pound Pressure Service valve.

The VG7241CS+3801B Centrifugal Centrifugal Valves for Johnson Controls Air Conditioning products, features both remote and local manual controls, double block and bleed ports to accept 1/2"-14 NC threaded fittings, built-in mechanical lubricators, three position valve options (closed to 1/2" NPT), order 1 or 3 port only

The VG7241CS+3801B is designed for use as a centrifugal pump. The VG7241C-S+3803B provides immediate on/off switching and has a rated discharge head of 491 ft. H2O (50m) with an industry standard discharge size of 1/2"" NPT male pipe threads.

This Johnson & 15.5", this valve is dual rated and designed to operate on both natural and propane gas. The unique "two-stage" design provides high isolation between the high and low pressure components of the valve, ensuring long life for both devices. The seating surface is tapered to ensure easy sealability between various tubing materials, including copper, brass, stainless steel, CPVC, PVDF, PTFE, MS diaphragm, nylon. This product includes a chrome-plated gas handle with manual override lever.

Designed to withstand a broad range of chemicals, the VG7241CS+3801B features a solenoid-operated normally closed check valve that provides positive shutoff of reverse fluid flow. A manual operator or fail-soft automatic system can be used with the solenoid check valve mounted in any position, including vertical. Made from copper chromium-plated brass with a stainless steel seat and stem, this valve is designed for use in refrigeration, heating and HVAC equipment where medium temperature liquids or gases are being handled.

The Johnson Controls VG7241CS+3801B is used to control commercial refrigeration equipment. The main control has a built in safety feature that restricts airflow to 19.5 GPM for safety reasons.

Medium range ball valve with handwheel, manual lever or gear operated gearbox, 2 way direct acting on stem, spindle sleeves and seats made of high polished chrome plated brass, bronze guides and hardened stainless steel ball, Class 150. Factory Mutual (FM) approved for use on natural gas.

This Johnson Controls Flow Controller is perfect for handling commercial refrigeration applications. Use it to control gas, air, water, oil, or steam. The Buna-N rubber thermowell helps protect against corrosion and other corrosives that could be found in your system. It can also withstand short term exposure at up to 621 degrees Fahrenheit. The thermometer is fitted with an easy to read high contrast face plate that will allow you to view the exact temperature of the device. This thermometer has a unique design that allows for better handling and installation.

Never reach for the skies again with the VG7241PLSS. With 16' retractable cord, easy-grip retractable handle, and grounding lugs this is the only lifeline you'll ever need.

Multiple cartridge sizes available.

When installed on new construction or as part of a retrofit, the SPD7 will enable you to save energy and money. The SPD7 has advanced diagnostics and performance capabilities that help you manage building systems and equipment, even when they're offline. This thermostat gives your tech support team new ways to troubleshoot problems and helps minimize unnecessary service calls. The intuitive interface and grouping capabilities allow tech support to see patterns and trends of problems over time. Plus, the SPD7 communicates alerts and performance information directly with the ComfortNET network via Ethernet or optional wireless communications.

Controls a heating system in a building