2-WAY N.O. 1/2" NPT VALVE BODY 1.8
At the heart of this valve is a monostable, 2-way pump control using a disc check patterned after the Johnson controls C440 timer. The C440 pattern lends itself well to the design of 1/2" N.O. 1.8cv vlv body and these values are maintained in this new design. The input pressure range is 15 psig to 100 psig and the output pressure range is 10 psig to 35 psig with a flow range of 20 SCFM at 10 PSIG and 70 SCFM at 90 PSIG .
VALVE BODY, HONEYWELL (R) TYPE 3052C-2, N.O., 1/2" NPT; 1/4" FNPT; 2700 PSI (PN# 3052C-2),(INDICATING 1/2" STRAIGHT N.O. VALVE (PN #VG7241ET)), SET PRESSURE 1 P.S.I., OPERATING PRESSURE RANGE 150 - 275 CPI, BODY MATERIAL STAINLESS STEEL, CAGE MATERIAL CARBON STEEL
Thank you for purchasing the Johnson Controls 37523 VG7241ET 1/2" N.O. 1.8 cv vlv body From the moment of purchase, the customer is provided with information on what the product is, why they need it, and how it benefits them
Our VG7241ET valve body is a two-way, 1/2" NPT Valve Body with 1/8" NPT sub outlets.
VG7241ET 1/2" NPT valve body suitable for use on Johnson Controls' NZNORTON™ product line of 1/4-turn, quarter-horsepower through 8-horsepower valves.
What is the Purpose of the Valve Body? When installed into an actuator, this valve body will actuate to open or close ports, which are inter-connected to control flows via air valves.
A 2-way Non-O device is used in the position where the flow is restricted in one direction and not in the opposite direction. A non-return valve senses flow direction while a check valve senses pressure direction. A non-return valve can be used to protect fluid systems from damaging back pressure, or supplement an existing backflow prevention assembly that uses check valves.
The T Series Schrader-Valved Gate Valves from Johnson Controls is a series of 1/2 inch gate valves, designed for industrial uses. These valves are designed to stand up to the chemical attack and harsh environments found in the industrial environment.
Johnson Controls Single solenoid valve
The VG7241ET Combination Body is used to isolate the fluid in an underfloor heating system (UFHS) from the heated building.
AquaSource 1003 T100W hot water heater with safety vent