Johnson Controls 38582 VG7251GS+3801D "1/2""NO UnGlobe 4-8# 4.6cv"

"1/2""NO UnGlobe 4-8# 4.6cv"

The Johnson Controls 38582 VG7251GS+3801D Vacuum Pump for the "1/2""NO UnGlobe 4-8# 4.6cv" is designed to replace damaged parts on most Johnson controls compressors. It includes the volute, a copper sleeve and partial diaphragm which are crucial for the compressor's performance. This replacement part can be used when repairing multiple brands of reciprocating compressors-"1/2""NO UnGlobe 4-8# 4.6cv" included-but should not be used in place of an approved service manual..

The Johnson Controls 38582 VG7251GS+3801D "1/2""NO UnGlobe 4-8# 4.6cv" is used to convert 1/2"NPT control valves to open and close with a 0-10V dc signal. The device enables the pump or actuator to control modulating operation of a solenoid valve by means of 0-10V dc or 0-5 Vdc pilot signal input. It is intended for general industrial controls applications involving variable flow controls, such as proportional integral derivative (PID) adaptive process control and bypass control in chemical, food

Johnson Controls 38582 is a 1/2""NO UnGlobe 4-8# 4.6cv that is made by Johnson Controls. This product is in the category of Air & Water Heaters and part number 38582.

UnGlobe valves for residential and light commercial, Standard supply for the domestic market, Screwed bonnet, non-rising stem, With hygienic seal TPE/PP (Polypropylene), Standard water outlet size 1 1/4" NPSM, With louvre, Supplied with cross and straight pieces

The controls are DN type, 3PC (3NO+1NC), replacement type, ANSI 156.12 A-B-C-D class electric actuator. For complete travel interlock and powered operation. Maximal stroke can be extended in accordance with the duty cycle. The limit switch part is of LED display common anode, 3LED signal light; Can apply to the control cabinet with the wooden handle and battery box or metal pressing handle;

Installs easily with copper piping, solenoid valves, and control board.

These units are designed for use with the following duct systems, Sheet Metal Duct. This unit can be installed with fixed speed or variable. The main circuit board (3601) on these units come pre-set at the factory with a fixed speed control. You control the airflow by setting the desired voltage output from the Variac.