Johnson Controls 39478 VG7443NT+3008E "1"" NC 11.6CV SS 9-13#"

"1"" NC 11.6CV SS 9-13#"

The Johnson Controls VG7443NT+3008E 1"" NC 11.6CV SS 9-13#" features a cast iron design, a brass NPT bushing, a 316 stainless steel shaft and a three piece handle for durability and comfort

1"" NC 11.6 CV, High Torque Air Actuation, 9-13# Mechanical Advantage

A 5 to 20 PSI temperature control system can be used to either increase or decrease temperatures to desired levels. The 1"" NC 11.6 CV motor enables the refrigerator to run on higher pressures for increased performance and efficiency. The solid brass unloader valve is less likely to freeze under low ambient temperatures than with other valves. This product contains a self-contained condensate pump that vents condensate outside of the building as opposed to releasing it inside.

The LB Series Recessed Vandal Switch from Johnson Controls is a flush-mount light switch designed to fit in 1"" N.C. wall boxes for high traffic areas, such as hallways, stairs, etc. The bezel on this model is stylish and flush with the wall surface to allow easy operation when installed within 1" of the door frame or surface. This vandal resistant toggle switch is rated at 600/300 Volts AC and has a lamp capacity of 9-13 Watts. The white finish gives it a sleek look that blends in with most decor.

A 3/8" NC Cam is a type of Cam that is used on Lathes. Cam Lathes are Lathes that have Cams instead of Mandrels. Cam Lathes are generally either Engine Lathes or Backgeared Lathes.

Johnson Controls VG7443NT+3008E, Three Phase Electric Variable Speed Nailer, 0 to 2000 thm (0 to 13 ft-lbs), Bump or Sequential Fire Modes

An energy-saving variable speed motor operates at a fixed rpm while load and line voltage varies. Ideal for a wide range of metal forming applications, this single-phase induction motor features a 1 hp design that is suitable for speeds up to 1300 rpm. The unit has a 0.75 service factor, 115 volt supply, and is CSA listed for all applicable Canadian safety standards. It comes standard with locking front hub snaps, thermal overload protection, and a main disconnect switch.Made in the USA

The Eaton Universal Servo Drives are designed with safety, efficiency, and installation in mind. Our full line of fluid, mechanical, and electrical servo drives is designed to meet the growing need for increased safety in industry. The VG7443 drive maintains stability by keeping current flowing constantly with no delay in torque rise time during Braking. It also features single lever adjustment of Braking and Torque settings for ease of use. These servo drives offer 1% accuracy and can be utilized for such diverse applications such as position control, machine tool feed drives, and multi-axis axis positioning systems."

This four-function electronic thermostat control combines state-of-the-art performance with the time-tested reliability you've come to expect from Johnson Controls. On/Off, On/Auto, Off/Auto, and Heat Pump are factory settable options.

Amp-hour

Provides significant reduction in HVAC system energy costs.