Johnson Controls 44285 VG7551ES+3801B "1/2""UnAng NO 1.8CV 3-6# BR =%"

"1/2""UnAng NO 1.8CV 3-6# BR =%"

The VG7551ES+3801B is designed for use in a Brine Unit (SU). Brine is pushed out of the SU and into the 1/2""UnAng NO 1.8CV 3-6# BR =%". The temperature of the brine is controlled by a Johnson Controls Temperature Controller (DC1) that receives information from a Johnson Controls Thermowell that is inserted into the brine.

Controls: The new Johnson Controls 44285 VG7551ES+3801B 1/2" UnAng NO 1.8CV 3-6# BR =% is a robust machine that helps you with all your needs.

The Johnson Controls 44285 VG7551ES+3801B is a 2.4 HP Variable Frequency Drive NEMA "1/2" UnAngulated (3-6 HP) Bearingless (BR= =%)! Coil Voltage: 208/230, 460 VAC, 50 Hz, Number of Poles: Single Phase, Operating Amperage: 7.5 Amp, Max Cont Output: 7.5 HP Continuous!, Amps Secondary #1 & #2 Open Circuit: 3 to 6 at full load, Varies with load!

The Johnson Controls 44285 VG7551ES+3801B Tempstar has a 1/2"" packing valve, and is un-angled with 1.8 cold-cranking amps and a 3-6# btu rating. The Johnson Controls 44285 VG7551ES+3801B is classified as a un-angled no tool required valve (UN/Ang), which has an unpowered float assembly. This equipment is manufactured in China for Johnson Controls Microclimate Division, and was originally designed for a Pool/Spa application, but can easily be converted to the LP Gas or Natural Gas markets.

With the VG7551, Johnson Controls presents an economical Variable Geometry Drum Pump that has gained tremendous popularity in the marketplace. This 1/2" pump provides 3 to 6 gal. per minute and comes equipped with built-in Check valve (CHK). Now you can upgrade your tank with this high quality pump and great features at a low cost. The VG7551E+3801B units have a green handle with mounting bracket, diaphragm shaft seal, and a one piece body. All of these units have a 1.8 CV solenoid valve and include a sight glass to monitor its operation

The 1/2""VG7551/3801B valve recognizes flow between 0.5 and 2 GPM at a 50% head change. The ABS body and top flange are designed for continuous service application with certain chemical solutions.

A durable expansion valve with high bursting pressure in a compact design for 1/2" or smaller copper water lines.