Johnson Controls 40525 1" NPT. 3 WAY MIXING VALVE ASSEMBLY WITH 24V ON-OF

1" NPT. 3 WAY MIXING VALVE ASSEMBLY WITH 24V ON-OF

With the 40525 1" NPT. 3 WAY MIXING VALVE ASSEMBLY WITH 24V ON-OF, you can direct water flow to three different areas of your home. It has a maximum operating pressure of 150 PSI at 70 degrees Fahrenheit, an extended threaded body with diaphragm safety check valve, and stainless steel packing gland to keep the product functioning optimally.

Johnson Controls 40525 1" NPT. 3 WAY MIXING VALVE ASSEMBLY WITH 24V ON-OF

If you need a replacement mixing valve for any of your Johnson Controls equipment, the 1" NPT. 3 WAY MIXING VALVE ASSEMBLY WITH 24V ON-OFF is a quality designed part that will help you accomplish the job effectively.

With the Johnson Controls 40525 1" NPT. Three way mixing valve assembly with 24V On-Off, you can now automatically open and close a valve to control pressure and temperature. Perfect for pool and spa applications such as spas, hot tubs, and water features, this mixing valve assembly is designed for use with hydronic heating systems. The brass body construction ensures durability and reliability for years of use.

The Johnson Controls 40525 1?3 way mixing valve assembly with 24V ON-OFF control is designed for use with radiant floor heating systems and supplies hot water to a radiant heating system. This Johnson Controls mixing valve assembly will make the installation process easier by allowing your contractor to mix both hot and cold water sources into one output (when used with two separate input lines).

This is 3 Way Mixing Control Valve Assembly is used to select discharge flow direction to specified outlet. Optional remote control meter assembly - 24 volts DC, Reverse flow valve assembly, Air discharge valve assembly & Air discharge orifice assembly may be used to control discharge air for refrigerated air conditioning applications. This valve also controls the discharge air temperature for refrigerated air conditioning applications. Optional adapter kits are available for possible connections to other manufacturers. Optional lead wires 044-00526 - 046-00010 must be ordered separately.

Capable of high flow mixing and flow control, the 40525 three way mixing valve is ideal for mixing hot and cold water in residential and commercial HVAC systems. Featuring a stainless steel actuator and diaphragm assembly, it has a 24 volt solenoid coil and an aluminum handle with a galvanized stem.

3 Position Mixing Valve Assembly

The design of this mix actuator with the embedded 24 VDC On-off operation allows uninterrupted flow within the system.

This mixing valve consists of a diaphragm type hybrid valve body and a stainless steel valve seat insert. The diaphragm provides pressure sensing to the actuator that controls a tri-port poppet. The ports are then independently controlled with either a spring lever or a 3 way solenoid valve.

A cast iron body with cast iron lever, cast bronze ball and seats, phenolic diaphragm for optimum strength and durability. Applications: Inline mixing of air and gas for heating, ventilating and air conditioning systems. For use in residential and commercial air conditioning equipment.

Heatspot® Economizers are designed for through-the-wall installation to provide the occupants of the building with both heating and cooling. Economizers control outdoor air volume which reduces your energy usage. They are particularly well suited for large, single zone systems with multiple ductwork paths. Designed for climatic applications, Economizers are available in capacities ranging from 100 CFM to 200,000 CFM.