Honeywell 3339 Basic / Snap Action Switches SPDT 15.1A 125VAC Roller Lever

24V STANDING PILOT NATURAL GAS VALV

The Honeywell 3339 Basic/Snap Action switches (SPDT) are compatible with a wide range of controls. Each switch operates at 15.1 amps with a 125-volt supply, and has a 24-volt standing pilot natural gas valve."

HONEYWELL MODULAR SWITCHES FEATURE A STANDING PILOT A15W, 24V DC CURRENT STEM. STANDING PILOT NOMINAL APPLICATION MINIMUM ELECTRICAL CHARGE -3 DEG C (EO-24V) . EACH SWITCH HAS TWO COMPONENTS, A CONTACT BLOCK AND ACTUATOR LEVER. THE STANDING PILOT IS MADE UP OF TEFLON TERMINALS FOR REDUCED CONTACT RESISTANCE AND CORROSION PROTECTION.

Enjoy ease of access with the Honeywell 3339 Basic / Snap Action Switch. Designed for use on baseboard heaters, this switch comes in a variety of stunning finishes. Featuring a snap action style, it is ideal for safety as it will interrupt the flow of power if the cover is opened. The safeguard that allows for your own personal touch and design is something that this switch offers, which will make it an important part of any room.

The 3339 Series heavy duty snap action switches feature a rugged, insulated switch body that meets or exceeds industry standards. The lever action is ball bearing equipped and uses a roller lever cam system that provides for needle bearings to extend switch life. The 3-conductor cordset and the contacts are nickel-plated brass with silver plating on the roller contacts. They are designed to operate from 125 VAC, 60 Hz. Current ratings of 15 amps at 125 VAC, 24 VDC and 9 amps at 250 VAC are standard. Voltage rating may be increased to 600 VAC with accessories available separately.

Designed to fit over standard 15-amp wallboxes, this device is perfect for controlling lighting, heaters, and appliances throughout the home.

The Honeywell 3386-2C2 is a 24 volt Snap-action switch with two SPDT positions. for dual isolated or common contacts with 15.0 amps at 125 volts, 50/60 Hertz. It is suited for the general purpose applications, suitable for most control circuits where direct current are required. It has a rugged construction to ensure that it is resistant to vibration and shock

Honeywell's basic ON/OFF snap-action switch is designed for control circuits up to 15 amps at 120 or 240 volts. Series 3339 is suitable for either preset or momentary ON-OFF applications and features a hard plastic case with a roller lever actuator which can be maintained in either the ON or OFF position. This series incorporates a mechanism which is free of frictional resistance when released, and does not require any appreciable force to reset. Roller lever actuator, 0.437" (11.1 mm) dia., maximum deflection, 2.280" (57.3 mm), snap