Honeywell 67137 1/2" SWEAT FAN COIL VALVE 3.5 CV, 20 PSI DIFFERENT

1/2" SWEAT FAN COIL VALVE 3.5 CV, 20 PSI DIFFERENT

Need help with Honeywell 67137 1/2" SWEAT FAN COIL VALVE 3.5 CV, 20 PSI DIFFERENT? You came to the right place. Get all your questions answered and compare prices on Honeywell 67137 1/2" SWEAT FAN COIL VALVE 3.5 CV, 20 PSI DIFFERENT in one click

Honeywell 67137 1/2" SWEAT FAN COIL VALVE 3.5 CV, 20 PSI DIFFERENT

This Honeywell 67137 S24010 1/2" sweat fan coil valve 3.5 CV, 20 PSI differential is ideal and will help conserve water. This product features an inlet connection at 15° angle, has a 1/2" sweat connection at 15° angle and includes a 2-way plumbed 50% flow reduction cap.

Convenient for three stages of zone control, the Honeywell S0436B67137 1/2" SWEAT FAN COIL VALVE 3.5 CV features steel construction and a PVB (pressure vacuum breaker) to ensure the safety of your plumbing. The body is made of EPDM rubber for enhanced durability, while the high-life PE diaphragm ensures that it is strong enough to withstand pressure fluctuations. This coil valve is compatible with several standard zoning systems and can work with temperatures between 32-400 degrees F (0-204 degrees C).

The Honeywell 67137 1/2" Sweat Fan Coil Valve is a 3.5" nominal w.c. non-tilt diaphragm valve with concentric poppet atomizer designed for use with low temperature heating and cooling fluids that are compatible with natural or manufactured rubber, chlorinated polyvinyl chloride (CPVC) if installed using back flow prevention, and polybutadiene elastomer (PBE) gaskets. This rotary disc type valve includes an integral push-to-test capillary tube for on-the-spot testing of the fluid level in the valve

Our 3/4" S-vent SWEAT-TAP® component works with standard 1/2" copper pipe and is installed about 4-6 feet above the coils to exhaust all of the condensation into the outside air. Traditional 2" S-vent lines are not recommended for coil discharge applications due to partial restriction of airflow caused by the bends in the 2" line.

The 9100KC/H Conversion Kit allows for increased load applications with a 20 PSI differential rating. The Conversion Kit includes the following components: Honeywell 9100KC control valve, mounting bracket, fan HC68/CFM, SSW safety solenoid, electrical cable assembly with wire terminal connector and a rail alignment template to aid in mounting.