Johnson Controls NS-WALLPLATE-0 ADAPTS A TE-6800 SENSOR (80 x 80 mm) TO A STANDARD

WALL PLATE

The NS-WALLPLATE-0 universal transmitter mounting plate is designed to allow the installation of the Johnson Controls standard wall mount adapter on any existing single or multi gang adapter plate. The plate uses one screw hole for mounting and contains an integrated cable hanger that secures the two pair twisted cable assembly.

The NS-WALLPLATE-0 is a mounting bracket for the TE6800 Temperature Sensor from Johnson Controls.

The NS-WALLPLATE-0 is designed to work with the TE Series Sensors, in specific the TE6800 in order to allow for simple mounting into a wall plate.

We designed this new wall plate to mount any 8" x 8" sensor from the TE-6800 series thermoelectric refrigeration air conditioning systems line of Johnson Controls.

This accessory converts the factory installed 6800 Series wall plate to accept the DDC 80 x 80 mm outdoor sensor DDC6800-ODC. The stainless steel construction unit can be used on all standard switch plates.

Ever wonder where to put your temperature sensors if you don't have any 3-1/2" x 3-1/2" wall tiles? Take our NS wall plate to the hardware store and get some extra standoffs with nuts and wing nuts. This is what we use in MCOOP to keep our temperature controllers up off the floor.

The AV-RAD4 wall plate assembly mounts the Trane temperature sensor to a standard JCI screwless wall plate. This part can be utilized if the temperature sensor is ordered with the Series 6 TE6800 thermostat. The AV-RAD4 assembly will also work with any JCI wall plate system up to two inches thick.

The adapater provides a flush fit to minimize the appearance of wiring in the finished installation. It has been designed to conform to standard electrical outlet wall plates allowing for a seamless appearance in the finished system.

This device is an adapter for the 680x series sensors that will enable you to connect it to a standard electrical wall plate. The plate is adjustable up or down. Using this device usually allows you to save time on installation projects.

This adapter allows a TE-6800 temperature sensor to be mounted using a standard electrical wall plate. Two half circle cutouts provide a secure mounting for the wall plate. This adapter can be used with a TE-6800 that is mounted in a thin wall, flat surface mount enclosure.

The TE-6800 is a two-wire standalone sensor for use with Contact ID Access Control Systems. The sensor is available in both battery-powered and hardwired versions.

The TE-6800 is a temperature sensor for electrical equipment in hazardous locations. It provides temperature measurements in line with circuit conditions. The TEMPTEMP terminal measures temperatures between -30 to +300 °C (-22 to 662 °F).