LEVEL CONTROL RELAY 120V
The WARRICK-GEMS 16DMC1B0 is a level control relay 120V. It has current rating of 8A RMS, contact capacity of 2A at 120VAC, and voltage rating of 120VAC. It has 2 form C contacts and quick actuating point.
Warrick's 16DMC level control relay is designed to monitor and maintain water levels in hot water tanks through automatic air vent control. Water level is sensed by a float attached to a lever arm, which operates the normally-open contacts of a power relay and completes an electrical circuit when the water reaches the desired level.
For use with heating, ventilating and air conditioning systems, a level control relay features normally open contact outputs for pour-point heaters, steam traps, and level switches. It is designed for mounting in a DIN rail. This device is made of plastic housing material with an NEMA 4X rating.
With the WG16DMC1B0 level control relay, you can replace your older style float switches with a more modern contactor type. This relay is built to provide dependable, long lasting performance. For applications such as refrigeration systems and heat transfer equipment using water/glycol or oil based solutions.
The 16DMC1B0 is a compact level control relay that allows for proportional control of water level in water heaters. This relay works on 120 volt systems. It also has a 24 VDC output for remote indication of an open or closed condition. It's used in gas fired water heaters and high efficiency electric water heaters.
The 16DMC1B0 is a solid-state level control relay that combines excellent sensitivity with long life. Its compact design and wide control voltage (50 VDC) make it suitable for use in fluids of various types.
The 16DMC1B0 is interchangeable, ENCLOSED, level sensing, control relay with one N.O. contact energized by an increase in water level and released by the decrease of the water level. Maximum differential pressure is 200 psi at 60ºF (15.6 bar at 15.6ºC). The 16DMC1B0 is ideal for low to medium flow applications.
LEVEL CONTROL RELAY 120V
The WARRICK-GEMS 16DMC1B0 is a level control relay 120V. It has current rating of 8A RMS, contact capacity of 2A at 120VAC, and voltage rating of 120VAC. It has 2 form C contacts and quick actuating point.
Warrick's 16DMC level control relay is designed to monitor and maintain water levels in hot water tanks through automatic air vent control. Water level is sensed by a float attached to a lever arm, which operates the normally-open contacts of a power relay and completes an electrical circuit when the water reaches the desired level.
For use with heating, ventilating and air conditioning systems, a level control relay features normally open contact outputs for pour-point heaters, steam traps, and level switches. It is designed for mounting in a DIN rail. This device is made of plastic housing material with an NEMA 4X rating.
With the WG16DMC1B0 level control relay, you can replace your older style float switches with a more modern contactor type. This relay is built to provide dependable, long lasting performance. For applications such as refrigeration systems and heat transfer equipment using water/glycol or oil based solutions.
The 16DMC1B0 is a compact level control relay that allows for proportional control of water level in water heaters. This relay works on 120 volt systems. It also has a 24 VDC output for remote indication of an open or closed condition. It's used in gas fired water heaters and high efficiency electric water heaters.
The 16DMC1B0 is a solid-state level control relay that combines excellent sensitivity with long life. Its compact design and wide control voltage (50 VDC) make it suitable for use in fluids of various types.
The 16DMC1B0 is interchangeable, ENCLOSED, level sensing, control relay with one N.O. contact energized by an increase in water level and released by the decrease of the water level. Maximum differential pressure is 200 psi at 60ºF (15.6 bar at 15.6ºC). The 16DMC1B0 is ideal for low to medium flow applications.