Warrick-Gems Sensors & Controls 16MB1A0 LEVEL CONTROL RELAY 120V

LEVEL CONTROL RELAY 120V

The LEVEL CONTROL relays are used to monitor differential pressure for the level control loop of a system. They provide both "manual trip" and logic trip capability. The LEVEL CONTROLLER provides an output signal when a liquid level sensor goes dry, or when the inlet pressure on the pump drops below the programmed differential level.

Level Control Relay NORMALLY CLOSED

GEM pressure level control relays feature the Sealed Switch Function. The Level Control Relay operates to keep constant pressure in a given area, while eliminating the need for operator adjustment. The relay features adjustable set point pressure, normally open contacts and an internal adjustable preset.

These Sensors and Controls level control relays are designed and manufactured to provide easy installation in nearly any application. The low voltage relay features a normally closed contact that is actuated by an adjustable level control.

Leveling control relay provides a true voltage output proportional to the level of water in an electronic or pneumatic tank or reservoir. The 16MB1A0 is suitable for a tank capacity of 2000 gal (7571 L) or more. ______

The 16MB-1A0 transmitter outputs a level control relay of 0 - 10 VDC with 0.5% total accuracy. It is equipped with a built-in transistor and SPDT (single pole double throw) switch that enable the user to simultaneously select three detection ranges at 2-, 3-, and 4-inch depth. The 16MB-1A0 transmitter can be easily programmed in the field to meet application demand.

The 9300 is a relay with built-in level controller and communicates via a Modbus RTU protocol.