Warrick-Gems Sensors & Controls 16ML1A0 GENERAL PURPOSE 120V 8 PIN OCT

GENERAL PURPOSE 120V 8 PIN OCT

Warrick-Gems Sensors & Controls 16ML1A0 GENERAL PURPOSE 120V 8 PIN OCT

The 8 pin octal device offers each input 8k pull-up resistors with up to 40mA sink capability and its outputs are driven from low side drivers. Each output has a 6.8k resistor to protect the circuit against damaging back-EMFs when an inductive load is connected directly between supply and output.

This Amphenol Octal Plug Connector 16Ml1A0 is designed specifically for use in harsh environments and operating temperatures of -25°F to +185°F. The three-piece design features a triple crimp register for a complete 360 degree electrical and mechanical connection. It has 0.187-inch 8-pin configuration connector housing with gold-plated contacts to ensure maximum current flow and low contact resistance.

The 16ML1A0 is a 16 character by 1 line LCD module for general purpose readout applications. The module can be configured to display any ASCII character, as well as a new line. The module uses an I2C bus interface for easy integration with most microcontrollers.

The 16ML1A is a 120V, 2-wire plug-in controller with manual switching that can also be configured for automatic switching using the SWITCH ON/OFF option.

The 16ML1A0 is a 1-channel 8-pin prewired monostable multivibrator with the selectable “ON” and “OFF” timing mode. The operation makes use of a single supply voltage (supply voltage from 7V to 28V) to achieve adjustable timing functions, which eliminates the need for any additional control circuit. It is equipped with two external pins for external input (ENABLE pin) and output enable (OUT pin).

The 16ML1A0 is a 4-20mA output module. It can be configured to operate as an 4-20mA current output and a shunt trip, or as a discrete 0-10V open collector/4-20mA output, with a switch attached to the TIP and RING terminals.