WEIL 511-330-085 McLain FLAME PROVING MOD.U-T# 1003-60 FLAME PROVING MOD.U-T# 1003-60

CTL IGN W/O SPARK TRANS Main Flame Proving Module

The FLAME PROVING MOD.U-T# 1003-60, CTL IGN W/O SPARK TRANS.

The main flame proving module is designed to be used in the electrostatic discharge protection test of high voltage power supplies that are used in the transmission of power between two points. It can prove the entire high-voltage terminal circuits or a portion of the circuit.

This flame proving module is used to test and adjust gas or liquid fuel gas systems for internal pressure, operation and control settings. It is used in conjunction with a standard internal combustion engine mounted on a suitable mount. Must be operated by a properly qualified operator. Supplied with sight glass, 0-15 psi pressure regulator and hand wheel valve.

The Flame Prove Module (FPM) has two igniters which can be used for flame proving in gas appliances. GLI02303[A]

This flame proving module is designed to prove the ignition of a protected electro-explosive module (EEM) without damaging the EEM. The EEM fired by this unit…

An ignition module is a device that produces a flame and usually has provision for feeding fuel and controlling air. A flame proving module (FPM) is an ignition module used to perform an open flame test of…

With the McLain™ flame proving module, you can test and prove the destructive power of a flame. Complete with operator control panel, operator safety glass front protection, gas manifold, pilot and burner valves and punch-out door construction.