WEIL 635-100-003 Vnt-A Auto1/8NPT150PSI 240DegF Automatic Air Vent

AUTOMATIC AIR VENT

The automatic air vent

The WEIL 635-100-003 Vnt-A Auto1/8NPT150PSI 240DegF Automatic Air Vent is designed to regulate the temperature of hot gases, whose effect can harm human body organs and eyes. The WEIL AUTO AIR VENT with thermostatic temperature controller helps to regulate temperatures and to avoid undesirable effects. It has a built-in alarm safety device.

Offer your customers a new way to save money on utilities with this automatic air vent! This cost-efficient device automatically adjusts the temperature in a controlled environment instead of relying on someone to manually adjust the temperature.

Automatic air vent will automatically open and close the air vent as the temperature requires. It can be adjusted by knob, no need to adjust open or close manually. Although it is applicable to all of pneumatic ball valves, we recommend it for 1/8"NPT150PSI, 3/4" or 1" automatic actuator (valve) control product(s).

The Weil 635-100-003 VNTA Auto1/8NPT150PSI 240DegF Automatic Air Vent features a automatic air pressure relief for low air vent. The automatic air vent is used to vent the boiler in an water heating, solar or central heating system when the system is brought back into service after an interruption such as maintenance or freezing.

The WEIL Vnt-A Auto1/8NPT150PSI is a automatic air vent that regulates the flow of gases into a pressure vessel by sensing the internal pressure and then adjusting it to the desired value. This air vent operates with a rising stem that opens to allow flow when pressure is greater than or equal to 110 PSIG. When pressure is below 75 PSIG, this air vent closes. The tip of the stem is a stopcock for manually determining whether the air vent is open or closed.

This air vent is used to automatically control temperature by controlling room air volume. Ideal for custom cabinet, metal work, and woodworking shops. Equipped with a thermally protected motor that spins a louvered blade to admit cool fresh air when the temperature is higher and exhaust hot air when the temperature is lower.